Package jdk.incubator.vector

Incubating Feature. Will be removed in a future release.

This package provides classes to express vector computations that, given suitable hardware and runtime ability, are accelerated using vector hardware instructions.

A vector is a sequence of a fixed number of lanes, all of some fixed element type such as byte, long, or float. Each lane contains an independent value of the element type. Operations on vectors are typically lane-wise, distributing some scalar operator (such as addition) across the lanes of the participating vectors, usually generating a vector result whose lanes contain the various scalar results. When run on a supporting platform, lane-wise operations can be executed in parallel by the hardware. This style of parallelism is called Single Instruction Multiple Data (SIMD) parallelism.

In the SIMD style of programming, most of the operations within a vector lane are unconditional, but the effect of conditional execution may be achieved using masked operations such as blend(), under the control of an associated VectorMask. Data motion other than strictly lane-wise flow is achieved using cross-lane operations, often under the control of an associated VectorShuffle. Lane data and/or whole vectors can be reformatted using various kinds of lane-wise conversions, and byte-wise reformatting reinterpretations, often under the control of a reflective VectorSpecies object which selects an alternative vector format different from that of the input vector.

Vector<E> declares a set of vector operations (methods) that are common to all element types. These common operations include generic access to lane values, data selection and movement, reformatting, and certain arithmetic and logical operations (such as addition or comparison) that are common to all primitive types.

Public subtypes of Vector correspond to specific element types. These declare further operations that are specific to that element type, including unboxed access to lane values, bitwise operations on values of integral element types, or transcendental operations on values of floating point element types.

Some lane-wise operations, such as the add operator, are defined as a full-service named operation, where a corresponding method on Vector comes in masked and unmasked overloadings, and (in subclasses) also comes in covariant overrides (returning the subclass) and additional scalar-broadcast overloadings (both masked and unmasked). Other lane-wise operations, such as the min operator, are defined as a partially serviced (not a full-service) named operation, where a corresponding method on Vector and/or a subclass provide some but all possible overloadings and overrides (commonly the unmasked varient with scalar-broadcast overloadings). Finally, all lane-wise operations (those named as previously described, or otherwise unnamed method-wise) have a corresponding operator token declared as a static constant on VectorOperators. Each operator token defines a symbolic Java expression for the operation, such as a + b for the ADD operator token. General lane-wise operation-token accepting methods, such as for a unary lane-wise operation, are provided on Vector and come in the same variants as a full-service named operation.

This package contains a public subtype of Vector corresponding to each supported element type: ByteVector, ShortVector, IntVector, LongVector, FloatVector, and DoubleVector.

Here is an example of multiplying elements of two float arrays a and b using vector computation and storing result in array c.

 static final VectorSpecies<Float> SPECIES = FloatVector.SPECIES_PREFERRED;

 void vectorMultiply(float[] a, float[] b, float[] c) {
   // It is assumed array arguments are of the same size
   for (int i = 0; i < a.length; i += SPECIES.length()) {
         VectorMask<Float> m = SPECIES.indexInRange(i, a.length);
         FloatVector va = FloatVector.fromArray(SPECIES, a, i, m);
         FloatVector vb = FloatVector.fromArray(SPECIES, b, i, m);
         FloatVector vc = va.mul(vb)
         vc.intoArray(c, i, m);
   }
 }
 

In the above example, we use masks, generated by indexInRange(), to prevent reading/writing past the array length. The first a.length / SPECIES.length() iterations will have a mask with all lanes set. Only the final iteration (if a.length is not a multiple of SPECIES.length() will have a mask with the first a.length % SPECIES.length() lanes set. Since a mask is used in all iterations, the above implementation may not achieve optimal performance (for large array lengths). The same computation can be implemented without masks as follows:

 static final VectorSpecies<Float> SPECIES = FloatVector.SPECIES_PREFERRED;

 void vectorMultiply(float[] a, float[] b, float[] c) {
   int i = 0;
   // It is assumed array arguments are of the same size
   for (; i < SPECIES.loopBound(a.length); i += SPECIES.length()) {
         FloatVector va = FloatVector.fromArray(SPECIES, a, i);
         FloatVector vb = FloatVector.fromArray(SPECIES, b, i);
         FloatVector vc = va.mul(vb)
         vc.intoArray(c, i);
   }

   for (; i < a.length; i++) {
     c[i] = a[i] * b[i];
   }
 }
 

The scalar computation after the vector computation is required to process a tail of TLENGTH array elements, where TLENGTH < SPECIES.length() for the vector species. The examples above use the preferred species (FloatVector.SPECIES_PREFERRED), ensuring code dynamically adapts to optimal shape for the platform on which it runs.

The helper method loopBound() is used in the above code to find the end of the vector loop. A primitive masking expression such as (a.length & ~(SPECIES.length() - 1)) might also be used here, since SPECIES.length() is known to be 8, which is a power of two. But this is not always a correct assumption. For example, if the FloatVector.SPECIES_PREFERRED turns out to have the platform-dependent shape S_Max_BIT, and that shape has some odd hypothetical size such as 384 (which is a valid vector size according to some architectures), then the hand-tweaked primitive masking expression may produce surprising results.

Performance notes

This package depends on the runtime's ability to dynamically compile vector operations into optimal vector hardware instructions. There is a default scalar implementation for each operation which is used if the operation cannot be compiled to vector instructions.

There are certain things users need to pay attention to for generating optimal vector machine code:

• The shape of vectors used should be supported by the underlying platform. For example, code written using IntVector of VectorShape S_512_BIT will not be compiled to vector instructions on a platform which supports only 256 bit vectors. Instead, the default scalar implementation will be used. For this reason, it is recommended to use the preferred species as shown above to write generically sized vector computations.
• Most classes defined in this package should be treated as value-based classes. This classification applies to Vector and its subtypes, VectorMask, VectorShuffle, and VectorSpecies. With these types, identity-sensitive operations such as == may yield unpredictable results, or reduced performance. Oddly enough, v.equals(w) is likely to be faster than v==w, since equals is not an identity sensitive method. Also, these objects can be stored in locals and parameters and as static final constants, but storing them in other Java fields or in array elements, while semantically valid, will may incur performance risks.

For every class in this package, unless specified otherwise, any method arguments of reference type must not be null, and any null argument will elicit a NullPointerException. This fact is not individually documented for methods of this API.