#include <stdint.h>
#include <sys/socket.h>
#include <sys/types.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netinet/ip.h>
#include <netinet/ip6.h>
#include <rte_compat.h>
#include <rte_byteorder.h>
#include <rte_mbuf.h>

Data Structures
struct	rte_ipv4_hdr

struct	rte_ipv6_hdr

Macros
#define	RTE_IPV4(a, b, c, d)

#define	RTE_IPV4_MAX_PKT_LEN 65535

#define	RTE_IPV4_HDR_IHL_MASK (0x0f)

#define	RTE_IPV4_IHL_MULTIPLIER (4)

#define	RTE_IPV4_ANY ((uint32_t)0x00000000)

#define	RTE_IPV4_LOOPBACK ((uint32_t)0x7f000001)

#define	RTE_IPV4_BROADCAST ((uint32_t)0xe0000000)

#define	RTE_IPV4_ALLHOSTS_GROUP ((uint32_t)0xe0000001)

#define	RTE_IPV4_ALLRTRS_GROUP ((uint32_t)0xe0000002)

#define	RTE_IPV4_MAX_LOCAL_GROUP ((uint32_t)0xe00000ff)

#define	RTE_IPV4_MIN_MCAST RTE_IPV4(224, 0, 0, 0)

#define	RTE_IPV4_MAX_MCAST RTE_IPV4(239, 255, 255, 255)

#define	RTE_IS_IPV4_MCAST(x) ((x) >= RTE_IPV4_MIN_MCAST && (x) <= RTE_IPV4_MAX_MCAST)

#define	RTE_IPV6_MIN_MTU 1280

#define	RTE_IPV6_EHDR_MF_SHIFT 0

Functions
static uint8_t	rte_ipv4_hdr_len (const struct rte_ipv4_hdr *ipv4_hdr)

static uint16_t	rte_raw_cksum (const void *buf, size_t len)

static int	rte_raw_cksum_mbuf (const struct rte_mbuf m, uint32_t off, uint32_t len, uint16_t cksum)

static uint16_t	rte_ipv4_cksum (const struct rte_ipv4_hdr *ipv4_hdr)

static uint16_t	rte_ipv4_phdr_cksum (const struct rte_ipv4_hdr *ipv4_hdr, uint64_t ol_flags)

static uint16_t	rte_ipv4_udptcp_cksum (const struct rte_ipv4_hdr ipv4_hdr, const void l4_hdr)

static __rte_experimental uint16_t	rte_ipv4_udptcp_cksum_mbuf (const struct rte_mbuf m, const struct rte_ipv4_hdr ipv4_hdr, uint16_t l4_off)

static __rte_experimental int	rte_ipv4_udptcp_cksum_verify (const struct rte_ipv4_hdr ipv4_hdr, const void l4_hdr)

static __rte_experimental int	rte_ipv4_udptcp_cksum_mbuf_verify (const struct rte_mbuf m, const struct rte_ipv4_hdr ipv4_hdr, uint16_t l4_off)

static uint16_t	rte_ipv6_phdr_cksum (const struct rte_ipv6_hdr *ipv6_hdr, uint64_t ol_flags)

static uint16_t	rte_ipv6_udptcp_cksum (const struct rte_ipv6_hdr ipv6_hdr, const void l4_hdr)

static __rte_experimental uint16_t	rte_ipv6_udptcp_cksum_mbuf (const struct rte_mbuf m, const struct rte_ipv6_hdr ipv6_hdr, uint16_t l4_off)

static __rte_experimental int	rte_ipv6_udptcp_cksum_verify (const struct rte_ipv6_hdr ipv6_hdr, const void l4_hdr)

static __rte_experimental int	rte_ipv6_udptcp_cksum_mbuf_verify (const struct rte_mbuf m, const struct rte_ipv6_hdr ipv6_hdr, uint16_t l4_off)

static __rte_experimental int	rte_ipv6_get_next_ext (const uint8_t p, int proto, size_t ext_len)

Detailed Description

IP-related defines

Definition in file rte_ip.h.

Macro Definition Documentation

◆ RTE_IPV4

#define RTE_IPV4	(	a,
		b,
		c,
		d
	)

Value:

                       ((uint32_t)(((a) & 0xff) << 24) | \
                       (((b) & 0xff) << 16) | \
                       (((c) & 0xff) << 8)  | \
                       ((d) & 0xff))

Create IPv4 address

Examples: examples/flow_classify/flow_classify.c, examples/ip_fragmentation/main.c, examples/ip_reassembly/main.c, examples/ipv4_multicast/main.c, examples/l3fwd-graph/main.c, examples/l3fwd-power/main.c, examples/l3fwd/l3fwd_em.c, and examples/l3fwd/main.c.

Definition at line 68 of file rte_ip.h.

◆ RTE_IPV4_MAX_PKT_LEN

#define RTE_IPV4_MAX_PKT_LEN 65535

Maximal IPv4 packet length (including a header)

Examples: examples/ipsec-secgw/ipsec-secgw.c.

Definition at line 74 of file rte_ip.h.

◆ RTE_IPV4_HDR_IHL_MASK

#define RTE_IPV4_HDR_IHL_MASK (0x0f)

Internet header length mask for version_ihl field

Examples: examples/ipsec-secgw/ipsec-secgw.c, and examples/l2fwd-crypto/main.c.

Definition at line 77 of file rte_ip.h.

◆ RTE_IPV4_IHL_MULTIPLIER

#define RTE_IPV4_IHL_MULTIPLIER (4)

Internet header length field multiplier (IHL field specifies overall header length in number of 4-byte words)

Examples: examples/ipsec-secgw/ipsec-secgw.c, examples/ipsec-secgw/sa.c, and examples/l2fwd-crypto/main.c.

Definition at line 82 of file rte_ip.h.

◆ RTE_IPV4_ANY

#define RTE_IPV4_ANY ((uint32_t)0x00000000)

0.0.0.0

Definition at line 110 of file rte_ip.h.

◆ RTE_IPV4_LOOPBACK

#define RTE_IPV4_LOOPBACK ((uint32_t)0x7f000001)

127.0.0.1

Definition at line 111 of file rte_ip.h.

◆ RTE_IPV4_BROADCAST

#define RTE_IPV4_BROADCAST ((uint32_t)0xe0000000)

224.0.0.0

Definition at line 112 of file rte_ip.h.

◆ RTE_IPV4_ALLHOSTS_GROUP

#define RTE_IPV4_ALLHOSTS_GROUP ((uint32_t)0xe0000001)

224.0.0.1

Definition at line 113 of file rte_ip.h.

◆ RTE_IPV4_ALLRTRS_GROUP

#define RTE_IPV4_ALLRTRS_GROUP ((uint32_t)0xe0000002)

224.0.0.2

Definition at line 114 of file rte_ip.h.

◆ RTE_IPV4_MAX_LOCAL_GROUP

#define RTE_IPV4_MAX_LOCAL_GROUP ((uint32_t)0xe00000ff)

224.0.0.255

Definition at line 115 of file rte_ip.h.

◆ RTE_IPV4_MIN_MCAST

#define RTE_IPV4_MIN_MCAST RTE_IPV4(224, 0, 0, 0)

Minimal IPv4-multicast address

Definition at line 121 of file rte_ip.h.

◆ RTE_IPV4_MAX_MCAST

#define RTE_IPV4_MAX_MCAST RTE_IPV4(239, 255, 255, 255)

Maximum IPv4 multicast address

Definition at line 123 of file rte_ip.h.

◆ RTE_IS_IPV4_MCAST

#define RTE_IS_IPV4_MCAST ( x ) ((x) >= RTE_IPV4_MIN_MCAST && (x) <= RTE_IPV4_MAX_MCAST)

check if IPv4 address is multicast

Examples: examples/ipv4_multicast/main.c.

Definition at line 129 of file rte_ip.h.

◆ RTE_IPV6_MIN_MTU

#define RTE_IPV6_MIN_MTU 1280

Minimum MTU for IPv6, see RFC 8200.

Definition at line 556 of file rte_ip.h.

◆ RTE_IPV6_EHDR_MF_SHIFT

#define RTE_IPV6_EHDR_MF_SHIFT 0

IPv6 fragment extension header.

Definition at line 770 of file rte_ip.h.

Function Documentation

◆ rte_ipv4_hdr_len()

static uint8_t rte_ipv4_hdr_len ( const struct rte_ipv4_hdr * ipv4_hdr )

inlinestatic

Get the length of an IPv4 header.

Parameters

ipv4_hdr Pointer to the IPv4 header.

Returns: The length of the IPv4 header (with options if present) in bytes.

Examples: examples/l3fwd/l3fwd_em.c.

Definition at line 144 of file rte_ip.h.

◆ rte_raw_cksum()

static uint16_t rte_raw_cksum	(	const void *	buf,
		size_t	len
	)

inlinestatic

Process the non-complemented checksum of a buffer.

Parameters

buf	Pointer to the buffer.
len	Length of the buffer.

Returns: The non-complemented checksum.

Definition at line 215 of file rte_ip.h.

◆ rte_raw_cksum_mbuf()

static int rte_raw_cksum_mbuf	(	const struct rte_mbuf *	m,
		uint32_t	off,
		uint32_t	len,
		uint16_t *	cksum
	)

inlinestatic

Compute the raw (non complemented) checksum of a packet.

Parameters

m	The pointer to the mbuf.
off	The offset in bytes to start the checksum.
len	The length in bytes of the data to checksum.
cksum	A pointer to the checksum, filled on success.

Returns: 0 on success, -1 on error (bad length or offset).

Definition at line 238 of file rte_ip.h.

◆ rte_ipv4_cksum()

static uint16_t rte_ipv4_cksum ( const struct rte_ipv4_hdr * ipv4_hdr )

inlinestatic

Process the IPv4 checksum of an IPv4 header.

The checksum field must be set to 0 by the caller.

Parameters

ipv4_hdr The pointer to the contiguous IPv4 header.

Returns: The complemented checksum to set in the IP packet.

Examples: examples/ipsec-secgw/ipsec-secgw.c, and examples/l3fwd-power/main.c.

Definition at line 308 of file rte_ip.h.

◆ rte_ipv4_phdr_cksum()

static uint16_t rte_ipv4_phdr_cksum	(	const struct rte_ipv4_hdr *	ipv4_hdr,
		uint64_t	ol_flags
	)

inlinestatic

Process the pseudo-header checksum of an IPv4 header.

The checksum field must be set to 0 by the caller.

Depending on the ol_flags, the pseudo-header checksum expected by the drivers is not the same. For instance, when TSO is enabled, the IP payload length must not be included in the packet.

When ol_flags is 0, it computes the standard pseudo-header checksum.

Parameters

ipv4_hdr	The pointer to the contiguous IPv4 header.
ol_flags	The ol_flags of the associated mbuf.

Returns: The non-complemented checksum to set in the L4 header.

Examples: examples/vhost/main.c.

Definition at line 334 of file rte_ip.h.

◆ rte_ipv4_udptcp_cksum()

static uint16_t rte_ipv4_udptcp_cksum	(	const struct rte_ipv4_hdr *	ipv4_hdr,
		const void *	l4_hdr
	)

inlinestatic

Process the IPv4 UDP or TCP checksum.

The layer 4 checksum must be set to 0 in the L4 header by the caller.

Parameters

ipv4_hdr	The pointer to the contiguous IPv4 header.
l4_hdr	The pointer to the beginning of the L4 header.

Returns: The complemented checksum to set in the L4 header.

Definition at line 398 of file rte_ip.h.

◆ rte_ipv4_udptcp_cksum_mbuf()

static __rte_experimental uint16_t rte_ipv4_udptcp_cksum_mbuf	(	const struct rte_mbuf *	m,
		const struct rte_ipv4_hdr *	ipv4_hdr,
		uint16_t	l4_off
	)

inlinestatic

Warning: EXPERIMENTAL: this API may change without prior notice.

Compute the IPv4 UDP/TCP checksum of a packet.

Parameters

m	The pointer to the mbuf.
ipv4_hdr	The pointer to the contiguous IPv4 header.
l4_off	The offset in bytes to start L4 checksum.

Returns: The complemented checksum to set in the L4 header.

Definition at line 459 of file rte_ip.h.

◆ rte_ipv4_udptcp_cksum_verify()

static __rte_experimental int rte_ipv4_udptcp_cksum_verify	(	const struct rte_ipv4_hdr *	ipv4_hdr,
		const void *	l4_hdr
	)

inlinestatic

Validate the IPv4 UDP or TCP checksum.

In case of UDP, the caller must first check if udp_hdr->dgram_cksum is 0 (i.e. no checksum).

Parameters

ipv4_hdr	The pointer to the contiguous IPv4 header.
l4_hdr	The pointer to the beginning of the L4 header.

Returns: Return 0 if the checksum is correct, else -1.

Definition at line 492 of file rte_ip.h.

◆ rte_ipv4_udptcp_cksum_mbuf_verify()

static __rte_experimental int rte_ipv4_udptcp_cksum_mbuf_verify	(	const struct rte_mbuf *	m,
		const struct rte_ipv4_hdr *	ipv4_hdr,
		uint16_t	l4_off
	)

inlinestatic

Warning: EXPERIMENTAL: this API may change without prior notice.

Verify the IPv4 UDP/TCP checksum of a packet.

In case of UDP, the caller must first check if udp_hdr->dgram_cksum is 0 (i.e. no checksum).

Parameters

m	The pointer to the mbuf.
ipv4_hdr	The pointer to the contiguous IPv4 header.
l4_off	The offset in bytes to start L4 checksum.

Returns: Return 0 if the checksum is correct, else -1.

Definition at line 523 of file rte_ip.h.

◆ rte_ipv6_phdr_cksum()

static uint16_t rte_ipv6_phdr_cksum	(	const struct rte_ipv6_hdr *	ipv6_hdr,
		uint64_t	ol_flags
	)

inlinestatic

Process the pseudo-header checksum of an IPv6 header.

Depending on the ol_flags, the pseudo-header checksum expected by the drivers is not the same. For instance, when TSO is enabled, the IPv6 payload length must not be included in the packet.

When ol_flags is 0, it computes the standard pseudo-header checksum.

Parameters

ipv6_hdr	The pointer to the contiguous IPv6 header.
ol_flags	The ol_flags of the associated mbuf.

Returns: The non-complemented checksum to set in the L4 header.

Examples: examples/vhost/main.c.

Definition at line 575 of file rte_ip.h.

◆ rte_ipv6_udptcp_cksum()

static uint16_t rte_ipv6_udptcp_cksum	(	const struct rte_ipv6_hdr *	ipv6_hdr,
		const void *	l4_hdr
	)

inlinestatic

Process the IPv6 UDP or TCP checksum.

The IPv6 header must not be followed by extension headers. The layer 4 checksum must be set to 0 in the L4 header by the caller.

Parameters

ipv6_hdr	The pointer to the contiguous IPv6 header.
l4_hdr	The pointer to the beginning of the L4 header.

Returns: The complemented checksum to set in the L4 header.

Definition at line 630 of file rte_ip.h.

◆ rte_ipv6_udptcp_cksum_mbuf()

static __rte_experimental uint16_t rte_ipv6_udptcp_cksum_mbuf	(	const struct rte_mbuf *	m,
		const struct rte_ipv6_hdr *	ipv6_hdr,
		uint16_t	l4_off
	)

inlinestatic

Warning: EXPERIMENTAL: this API may change without prior notice.

Process the IPv6 UDP or TCP checksum of a packet.

The IPv6 header must not be followed by extension headers. The layer 4 checksum must be set to 0 in the L4 header by the caller.

Parameters

m	The pointer to the mbuf.
ipv6_hdr	The pointer to the contiguous IPv6 header.
l4_off	The offset in bytes to start L4 checksum.

Returns: The complemented checksum to set in the L4 header.

Definition at line 691 of file rte_ip.h.

◆ rte_ipv6_udptcp_cksum_verify()

static __rte_experimental int rte_ipv6_udptcp_cksum_verify	(	const struct rte_ipv6_hdr *	ipv6_hdr,
		const void *	l4_hdr
	)

inlinestatic

Validate the IPv6 UDP or TCP checksum.

In case of UDP, the caller must first check if udp_hdr->dgram_cksum is 0: this is either invalid or means no checksum in some situations. See 8.1 (Upper-Layer Checksums) in RFC 8200.

Parameters

ipv6_hdr	The pointer to the contiguous IPv6 header.
l4_hdr	The pointer to the beginning of the L4 header.

Returns: Return 0 if the checksum is correct, else -1.

Definition at line 725 of file rte_ip.h.

◆ rte_ipv6_udptcp_cksum_mbuf_verify()

static __rte_experimental int rte_ipv6_udptcp_cksum_mbuf_verify	(	const struct rte_mbuf *	m,
		const struct rte_ipv6_hdr *	ipv6_hdr,
		uint16_t	l4_off
	)

inlinestatic

Warning: EXPERIMENTAL: this API may change without prior notice.

Validate the IPv6 UDP or TCP checksum of a packet.

In case of UDP, the caller must first check if udp_hdr->dgram_cksum is 0: this is either invalid or means no checksum in some situations. See 8.1 (Upper-Layer Checksums) in RFC 8200.

Parameters

m	The pointer to the mbuf.
ipv6_hdr	The pointer to the contiguous IPv6 header.
l4_off	The offset in bytes to start L4 checksum.

Returns: Return 0 if the checksum is correct, else -1.

Definition at line 757 of file rte_ip.h.

◆ rte_ipv6_get_next_ext()

static __rte_experimental int rte_ipv6_get_next_ext	(	const uint8_t *	p,
		int	proto,
		size_t *	ext_len
	)

inlinestatic

Parse next IPv6 header extension

This function checks if proto number is an IPv6 extensions and parses its data if so, providing information on next header and extension length.

Parameters

p	Pointer to an extension raw data.
proto	Protocol number extracted from the "next header" field from the IPv6 header or the previous extension.
ext_len	Extension data length.

Returns: next protocol number if proto is an IPv6 extension, -EINVAL otherwise

Examples: examples/ipsec-secgw/ipsec-secgw.c, and examples/ipsec-secgw/ipsec_worker.c.

Definition at line 812 of file rte_ip.h.

Data Structures

Macros

Functions

Detailed Description

Macro Definition Documentation

◆ RTE_IPV4

◆ RTE_IPV4_MAX_PKT_LEN

◆ RTE_IPV4_HDR_IHL_MASK

◆ RTE_IPV4_IHL_MULTIPLIER

◆ RTE_IPV4_ANY

◆ RTE_IPV4_LOOPBACK

◆ RTE_IPV4_BROADCAST

◆ RTE_IPV4_ALLHOSTS_GROUP

◆ RTE_IPV4_ALLRTRS_GROUP

◆ RTE_IPV4_MAX_LOCAL_GROUP

◆ RTE_IPV4_MIN_MCAST

◆ RTE_IPV4_MAX_MCAST

◆ RTE_IS_IPV4_MCAST

◆ RTE_IPV6_MIN_MTU

◆ RTE_IPV6_EHDR_MF_SHIFT

Function Documentation

◆ rte_ipv4_hdr_len()

◆ rte_raw_cksum()

◆ rte_raw_cksum_mbuf()

◆ rte_ipv4_cksum()

◆ rte_ipv4_phdr_cksum()

◆ rte_ipv4_udptcp_cksum()

◆ rte_ipv4_udptcp_cksum_mbuf()

◆ rte_ipv4_udptcp_cksum_verify()

◆ rte_ipv4_udptcp_cksum_mbuf_verify()

◆ rte_ipv6_phdr_cksum()

◆ rte_ipv6_udptcp_cksum()

◆ rte_ipv6_udptcp_cksum_mbuf()

◆ rte_ipv6_udptcp_cksum_verify()

◆ rte_ipv6_udptcp_cksum_mbuf_verify()

◆ rte_ipv6_get_next_ext()