Overview Package Class Use Source Tree Index Deprecated About
Frames | No Frames

Uses of Class org.omg.CORBA.portable.InputStream

Uses in package javax.rmi.CORBA

Methods with parameter type org.omg.CORBA.portable.InputStream

Object
Util.readAny(InputStream input)
Read Any from the input stream.
Object
UtilDelegate.readAny(InputStream input)
Read Any from the input stream.
Serializable
ValueHandler.readValue(InputStream in, int offset, Class<T> clz, String repositoryID, RunTime sender)
Read value from the CORBA input stream in the case when the value is not Streamable or CustomMarshall'ed.

Uses in package org.omg.PortableServer.CurrentPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

NoContext
NoContextHelper.read(InputStream input)
Read the exception from the CDR intput stream.

Uses in package org.omg.IOP

Methods with parameter type org.omg.CORBA.portable.InputStream

void
IORHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
MultipleComponentProfileHolder._read(InputStream input)
Read the value array from the CDR stream.
void
ServiceContextHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
ServiceContextListHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
TaggedComponentHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
TaggedProfileHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
CodecFactory
CodecFactoryHelper.read(InputStream input)
This should read the CodecFactory from the CDR intput stream, but this is not possible as CodecFactory is a local object.
int
ComponentIdHelper.read(InputStream input)
Read the ComponentId from the CDR intput stream.
IOR
IORHelper.read(InputStream input)
Read the structure from the CDR intput stream.
TaggedComponent[]
MultipleComponentProfileHelper.read(InputStream input)
Read the sequence from the CDR intput stream.
int
ProfileIdHelper.read(InputStream input)
Read the ProfileId from the CDR intput stream.
ServiceContext
ServiceContextHelper.read(InputStream input)
Read the context from the CDR intput stream (first id, then data as a flexible length byte sequence).
ServiceContext[]
ServiceContextListHelper.read(InputStream input)
Read the ServiceContext[] from the CDR intput stream as a flexible lenth sequence.
int
ServiceIdHelper.read(InputStream input)
Read the ServiceId from the CDR intput stream.
TaggedComponent
TaggedComponentHelper.read(InputStream input)
Read the structure from the CDR intput stream.
TaggedProfile
TaggedProfileHelper.read(InputStream input)
Read the structure from the CDR intput stream.

Uses in package gnu.CORBA.GIOP.v1_0

Methods with parameter type org.omg.CORBA.portable.InputStream

void
CancelHeader.read(InputStream input)
Read the header.

Uses in package gnu.javax.rmi.CORBA

Methods with parameter type org.omg.CORBA.portable.InputStream

Object
UtilDelegateImpl.readAny(InputStream input)
Read Any from the input stream.
Serializable
RmiUtilities.readValue(InputStream in, int offset, Class<T> clz, String repositoryID, RunTime sender)
Read value from the input stream in the case when the value is not Streamable or CustomMarshalled.

Uses in package org.omg.DynamicAny.DynAnyPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

InvalidValue
InvalidValueHelper.read(InputStream input)
Read the exception from the CDR intput stream.
TypeMismatch
TypeMismatchHelper.read(InputStream input)
Read the exception from the CDR intput stream.

Uses in package org.omg.PortableServer.ServantLocatorPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

void
CookieHolder._read(InputStream input)
java.lang.Object is outside the scope of the CORBA standards and the read operation cannot be supported in a language-neutral way.

Uses in package org.omg.CosNaming

Methods with parameter type org.omg.CORBA.portable.InputStream

OutputStream
BindingIteratorPOA._invoke(String method, InputStream in, ResponseHandler rh)
Call the required method.
OutputStream
NamingContextExtPOA._invoke(String method, InputStream in, ResponseHandler rh)
OutputStream
NamingContextPOA._invoke(String method, InputStream in, ResponseHandler rh)
The server calls this method after receiving the request message from client.
OutputStream
_BindingIteratorImplBase._invoke(String method, InputStream in, ResponseHandler rh)
Call the required method.
OutputStream
_NamingContextExtImplBase._invoke(String method, InputStream in, ResponseHandler rh)
Invoke the object method.
OutputStream
_NamingContextImplBase._invoke(String method, InputStream in, ResponseHandler rh)
The server calls this method after receiving the request message from client.
void
BindingHolder._read(InputStream i)
Read the holder value from the CDR stream.
void
BindingIteratorHolder._read(InputStream in)
Read the holder value from the CDR stream.
void
BindingListHolder._read(InputStream in)
Read the binding list from the given CDR stream.
void
BindingTypeHolder._read(InputStream in)
Read the holder value from the CDR input stream.
void
NameComponentHolder._read(InputStream in)
Fill in the value field by reading it from the CDR input stream.
void
NameHolder._read(InputStream in)
Fill in the holder value by reading it from the CDR input stream.
void
NamingContextExtHolder._read(InputStream i)
Read the naming context from the given CDR input stream.
void
NamingContextHolder._read(InputStream in)
Read the naming context from the given CDR input stream.
Binding
BindingHelper.read(InputStream istream)
Read the binding from the given CDR stream.
BindingIterator
BindingIteratorHelper.read(InputStream istream)
Read the exception from the given CDR stream.
Binding[]
BindingListHelper.read(InputStream istream)
Read the array of bindings from the given CDR input stream.
BindingType
BindingTypeHelper.read(InputStream istream)
Read the binding type from the CDR input stream.
String
IstringHelper.read(InputStream istream)
Calls InputStream.read_string().
NameComponent
NameComponentHelper.read(InputStream istream)
Read the name component from the given CDR input stream.
NameComponent[]
NameHelper.read(InputStream istream)
Read the Name from the given CDR input stream.
NamingContextExt
NamingContextExtHelper.read(InputStream istream)
Read the extended naming context from the given CDR input stream.
NamingContext
NamingContextHelper.read(InputStream istream)
Read the naming context from the given CDR input stream.

Uses in package gnu.CORBA.DynAn

Methods with parameter type org.omg.CORBA.portable.InputStream

void
NameValuePairHolder._read(InputStream input)
Read the name value pair.

Uses in package gnu.CORBA.GIOP

Methods with parameter type org.omg.CORBA.portable.InputStream

void
CancelHeader.read(InputStream input)
Read the header.

Uses in package org.omg.IOP.CodecPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

FormatMismatch
FormatMismatchHelper.read(InputStream input)
Read the exception from the CDR intput stream.
InvalidTypeForEncoding
InvalidTypeForEncodingHelper.read(InputStream input)
Read the exception from the CDR intput stream.
TypeMismatch
TypeMismatchHelper.read(InputStream input)
Read the exception from the CDR intput stream.

Uses in package org.omg.PortableInterceptor

Methods with parameter type org.omg.CORBA.portable.InputStream

void
IORInterceptor_3_0Holder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
ObjectReferenceFactoryHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
ObjectReferenceTemplateHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
ObjectReferenceTemplateSeqHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
int
AdapterManagerIdHelper.read(InputStream input)
Read the int (adapter manager id) from the CDR intput stream.
String[]
AdapterNameHelper.read(InputStream input)
Reads the String[] from the CORBA input stream.
short
AdapterStateHelper.read(InputStream input)
Read the short (adapter state) from the CDR intput stream.
Current
CurrentHelper.read(InputStream input)
Not supported for compatibility reasons.
ForwardRequest
ForwardRequestHelper.read(InputStream input)
Read the exception from the CDR intput stream.
InvalidSlot
InvalidSlotHelper.read(InputStream input)
Read the exception from the CDR intput stream.
IORInterceptor_3_0
IORInterceptor_3_0Helper.read(InputStream input)
Read the IORInterceptor_3_0 from the CDR intput stream (IOR profile expected).
byte[]
ObjectIdHelper.read(InputStream input)
Read the Object Id as a byte array.
ObjectReferenceFactory
ObjectReferenceFactoryHelper.read(InputStream input)
Read the ObjectReferenceFactory from the CDR intput stream (ValueBase type expected).
ObjectReferenceTemplate
ObjectReferenceTemplateHelper.read(InputStream input)
Read the object reference template (as the value type).
ObjectReferenceTemplate[]
ObjectReferenceTemplateSeqHelper.read(InputStream input)
Reads the ObjectReferenceTemplate[] from the CORBA input stream.
String
ORBIdHelper.read(InputStream input)
Calls InputStream.read_string().
String
ServerIdHelper.read(InputStream input)
Calls InputStream.read_string().

Uses in package org.omg.CORBA

Methods with parameter type org.omg.CORBA.portable.InputStream

void
AnyHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
AnySeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
BooleanHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
BooleanSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ByteHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
CharHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
CharSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
CurrentHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
DoubleHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
DoubleSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
FixedHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
FloatHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
FloatSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
IntHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
LongHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
LongLongSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
LongSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ObjectHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
OctetSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ParameterModeHolder._read(InputStream in)
Fill in the value by data from the CDR stream.
void
PolicyErrorHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
PolicyHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
PolicyListHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
PrincipalHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ServiceInformationHolder._read(InputStream in)
Read the service information from the given CDR input stream.
void
ShortHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ShortSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
StringHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
StringSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
TypeCodeHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ULongLongSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ULongSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
UnknownUserExceptionHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
UShortSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ValueBaseHolder._read(InputStream input)
Read fill in the value field by reading an instance from the given input stream.
void
WCharSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
WrongTransactionHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
WStringSeqHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
LocalObject._releaseReply(InputStream input)
This method is not appropriate for the local objects and just throws an exception.
Any[]
AnySeqHelper.read(InputStream input)
Reads the Any[] from the CORBA input stream.
boolean[]
BooleanSeqHelper.read(InputStream input)
Reads the boolean[] from the CORBA input stream.
char[]
CharSeqHelper.read(InputStream input)
Reads the char[] from the CORBA input stream.
CompletionStatus
CompletionStatusHelper.read(InputStream input)
Reads the CompletionStatus from the CORBA input stream.
Current
CurrentHelper.read(InputStream input)
Read the Current from the CDR intput stream (IOR profile expected).
DefinitionKind
DefinitionKindHelper.read(InputStream istream)
Read the definitin kind (as int) from the CDR intput stream.
double[]
DoubleSeqHelper.read(InputStream input)
Reads the double[] from the CORBA input stream.
String
FieldNameHelper.read(InputStream istream)
Calls InputStream.read_string().
float[]
FloatSeqHelper.read(InputStream input)
Reads the float[] from the CORBA input stream.
String
IdentifierHelper.read(InputStream istream)
Calls InputStream.read_string().
IDLType
IDLTypeHelper.read(InputStream istream)
Read the IDL type from the given input stream.
long[]
LongLongSeqHelper.read(InputStream input)
Reads the long long[] from the CORBA input stream.
int[]
LongSeqHelper.read(InputStream input)
Reads the int[] from the CORBA input stream.
NameValuePair
NameValuePairHelper.read(InputStream istream)
Read the NameValuePair from the given CDR stream.
Object
ObjectHelper.read(InputStream istream)
Read the object from the given CDR input stream.
byte[]
OctetSeqHelper.read(InputStream input)
Reads the byte[] from the CORBA input stream.
ParameterMode
ParameterModeHelper.read(InputStream istream)
Read the enumeration value (as int) from the CDR intput stream.
short
PolicyErrorCodeHelper.read(InputStream istream)
Delegates call to InputStream.read_short().
PolicyError
PolicyErrorHelper.read(InputStream input)
Read the exception from the CDR intput stream.
Policy
PolicyHelper.read(InputStream input)
Read the object from the CDR intput stream (IOR profile expected).
Policy[]
PolicyListHelper.read(InputStream input)
Read the sequence of policies from the CDR intput stream.
int
PolicyTypeHelper.read(InputStream input)
Read the int (policy type) from the CDR intput stream.
String
RepositoryIdHelper.read(InputStream istream)
Calls InputStream.read_string().
ServiceDetail
ServiceDetailHelper.read(InputStream istream)
Read the service detail information from the given CDR intput stream.
ServiceInformation
ServiceInformationHelper.read(InputStream istream)
Read the service information from the given CDR input stream.
SetOverrideType
SetOverrideTypeHelper.read(InputStream istream)
Read the enumeration value (as int) from the CDR intput stream.
short[]
ShortSeqHelper.read(InputStream input)
Reads the short[] from the CORBA input stream.
String[]
StringSeqHelper.read(InputStream input)
Reads the String[] from the CORBA input stream.
String
StringValueHelper.read(InputStream in)
Reads a string as a value type.
StructMember
StructMemberHelper.read(InputStream istream)
Read the StructMember from the input stream.
long[]
ULongLongSeqHelper.read(InputStream input)
Reads the long[] from the CORBA input stream.
int[]
ULongSeqHelper.read(InputStream input)
Reads the int[] from the CORBA input stream.
UnionMember
UnionMemberHelper.read(InputStream istream)
Read the union member from the given stream.
UnknownUserException
UnknownUserExceptionHelper.read(InputStream input)
Read the exception from the CDR intput stream.
short[]
UShortSeqHelper.read(InputStream input)
Reads the short[] from the CORBA input stream.
Serializable
ValueBaseHelper.read(InputStream input)
Read the value base from the given input stream.
ValueMember
ValueMemberHelper.read(InputStream istream)
Reads the value member from the given stream.
String
VersionSpecHelper.read(InputStream istream)
Calls InputStream.read_string().
short
VisibilityHelper.read(InputStream istream)
Read the visibility value (as short) from the CDR intput stream.
char[]
WCharSeqHelper.read(InputStream input)
Reads the char[] from the CORBA input stream.
WrongTransaction
WrongTransactionHelper.read(InputStream input)
Read the exception from the CDR intput stream.
String[]
WStringSeqHelper.read(InputStream input)
Reads the String[] from the CORBA input stream.
String
WStringValueHelper.read(InputStream in)
Reads a wide string as a value type.
Serializable
StringValueHelper.read_value(InputStream istream)
Read the string value from the input stream.
Serializable
WStringValueHelper.read_value(InputStream istream)
Read the wide string value from the input stream.
void
Any.read_value(InputStream input, TypeCode type)
Read the value into this Any from the given input stream.

Methods with return type org.omg.CORBA.portable.InputStream

InputStream
LocalObject._invoke(OutputStream output)
Invokes the operation.
InputStream
Any.create_input_stream()
Creates an input stream from that this Any object's value can be read (unmarshalled).

Uses in package org.omg.CORBA_2_3.portable

Classes derived from org.omg.CORBA.portable.InputStream

class
InputStream
This class defines a new CDR input stream methods, added since CORBA 2.3.

Uses in package org.omg.PortableServer.POAPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

AdapterAlreadyExists
AdapterAlreadyExistsHelper.read(InputStream input)
Read the exception from the CDR intput stream.
AdapterNonExistent
AdapterNonExistentHelper.read(InputStream input)
Read the exception from the CDR intput stream.
InvalidPolicy
InvalidPolicyHelper.read(InputStream input)
Read the exception from the CDR intput stream.
NoServant
NoServantHelper.read(InputStream input)
Read the exception from the CDR intput stream.
ObjectAlreadyActive
ObjectAlreadyActiveHelper.read(InputStream input)
Read the exception from the CDR intput stream.
ObjectNotActive
ObjectNotActiveHelper.read(InputStream input)
Read the exception from the CDR intput stream.
ServantAlreadyActive
ServantAlreadyActiveHelper.read(InputStream input)
Read the exception from the CDR intput stream.
ServantNotActive
ServantNotActiveHelper.read(InputStream input)
Read the exception from the CDR intput stream.
WrongAdapter
WrongAdapterHelper.read(InputStream input)
Read the exception from the CDR intput stream.
WrongPolicy
WrongPolicyHelper.read(InputStream input)
Read the exception from the CDR intput stream.

Uses in package org.omg.CosNaming.NamingContextExtPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

void
InvalidAddressHolder._read(InputStream in)
Fill in the stored value, reading it from the given CDR stream.
String
AddressHelper.read(InputStream istream)
Delegates functionality to InputStream.read_string().
InvalidAddress
InvalidAddressHelper.read(InputStream istream)
Read the exception from the given CDR stream.
String
StringNameHelper.read(InputStream istream)
Delegates functionality to InputStream.read_string().
String
URLStringHelper.read(InputStream istream)
Delegates functionality to InputStream.read_string().

Uses in package gnu.CORBA

Constructors with parameter type org.omg.CORBA.portable.InputStream

StreamHolder.StreamHolder(InputStream a_stream)
Create a holder that will read from the given stream.

Fields of type org.omg.CORBA.portable.InputStream

InputStream
StreamHolder.stream
The stream, holding the data for this holder.

Methods with parameter type org.omg.CORBA.portable.InputStream

OutputStream
_PolicyImplBase._invoke(String method, InputStream input, ResponseHandler rh)
Call the required method.
void
DefinitionKindHolder._read(InputStream in)
Read from the CDR stream.
void
DuplicateNameHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
DynAnySeqHolder._read(InputStream input)
The method should read this object from the CDR input stream, but (following the JDK 1.5 API) it does not.
void
EmptyExceptionHolder._read(InputStream input)
Reads the exception from the input stream.
void
gnuValueHolder._read(InputStream input)
Read, trying to locate helper, if possible.
void
GeneralHolder._read(InputStream input)
Reads into the internal buffer till the end of stream is reached.
void
NameDynAnyPairHolder._read(InputStream input)
The method should read this object from the CDR input stream, but (following the JDK 1.5 API) it does not.
void
NameDynAnyPairSeqHolder._read(InputStream input)
The method should read this object from the CDR input stream, but (following the JDK 1.5 API) it does not.
void
NameValuePairHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
NameValuePairSeqHolder._read(InputStream input)
Read the value array from the CDR stream.
void
OctetHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
ServiceDetailHolder._read(InputStream in)
Read from the CDR stream.
void
SetOverrideTypeHolder._read(InputStream in)
Fill in the value by data from the CDR stream.
void
StreamHolder._read(InputStream input)
This method is not in use, should never be called.
void
WCharHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
void
WStringHolder._read(InputStream input)
Fill in the value field by reading the required data from the given stream.
ForwardRequest
ForwardRequestHelper.read(InputStream input)
Read the exception from the CDR intput stream.
void
IOR.CodeSets_profile.CodeSet_component.read(InputStream in)
Read from the CDR stream.
TypeCode
TypeCodeHelper.read(InputStream in)
Read the CORBA TypeCode.
SystemException
ObjectCreator.readSystemException(InputStream input, ServiceContext[] contexts)
Read the system exception from the given stream.
UserException
ObjectCreator.readUserException(String idl, InputStream input)
Reads the user exception, having the given Id, from the input stream.
void
gnuAny.read_value(InputStream input, TypeCode a_type)
Read the value of the given type from the given stream.

Methods with return type org.omg.CORBA.portable.InputStream

InputStream
gnuAny.create_input_stream()
Create the buffered CDR input stream, containing the value, stored inside of this Any.
InputStream
IorDelegate.invoke(Object target, OutputStream output)
Invoke operation on the given object, als handling temproray and permanent redirections.

Uses in package gnu.CORBA.Poa

Methods with parameter type org.omg.CORBA.portable.InputStream

OutputStream
DynamicImpHandler._invoke(String method, InputStream input, ResponseHandler handler)
We cannot invoke properly without having parameter info.
OutputStream
ForwardedServant._invoke(String method, InputStream input, ResponseHandler handler)
Forward the call to the wrapped object.
OutputStream
gnuServantObject._invoke(String method, InputStream input, ResponseHandler r_handler)
Handle the invocation (delegates to servant).
void
ForwardRequestHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
InvalidPolicyHolder._read(InputStream input)
Fill in the value by data from the CDR stream.
void
gnuServantObject._releaseReply(InputStream stream)
Returns without action.
void
LocalDelegate.releaseReply(Object target, InputStream input)

Methods with return type org.omg.CORBA.portable.InputStream

InputStream
LocalDelegate.invoke(Object target, OutputStream output)
Make an invocation.
InputStream
LocalRequest.v_invoke(InvokeHandler handler)
Make an invocation and return a stream from where the results can be read.

Uses in package org.omg.IOP.CodecFactoryPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

UnknownEncoding
UnknownEncodingHelper.read(InputStream input)
Read the exception from the CDR intput stream.

Uses in package org.omg.PortableInterceptor.ORBInitInfoPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

DuplicateName
DuplicateNameHelper.read(InputStream input)
Read the exception from the CDR intput stream.
InvalidName
InvalidNameHelper.read(InputStream input)
Read the exception from the CDR intput stream.
String
ObjectIdHelper.read(InputStream input)
Calls InputStream.read_string().

Uses in package org.omg.CORBA.portable

Constructors with parameter type org.omg.CORBA.portable.InputStream

ApplicationException.ApplicationException(String id, InputStream input)
Creates an exception.

Methods with parameter type org.omg.CORBA.portable.InputStream

OutputStream
InvokeHandler._invoke(String method, InputStream input, ResponseHandler handler)
Invoke the object method.
void
Streamable._read(InputStream input)
Fill in the value field for this holder by reading the required data from the given stream.
void
ObjectImpl._releaseReply(InputStream stream)
Release the reply stream back to ORB after finishing reading the data from it.
Serializable
BoxedValueHelper.read_value(InputStream istream)
Read this value type from the CDR stream.
void
Delegate.releaseReply(Object target, InputStream input)
Release the reply stream back to ORB after finishing reading the data from it.

Methods with return type org.omg.CORBA.portable.InputStream

InputStream
ObjectImpl._invoke(OutputStream output)
Invoke the operation.
InputStream
OutputStream.create_input_stream()
Returns an input stream with the same buffer.
InputStream
ApplicationException.getInputStream()
Get the input stream from where the exception parameters can be read.
InputStream
Delegate.invoke(Object target, OutputStream output)
Invoke the operation.

Uses in package org.omg.PortableServer

Methods with parameter type org.omg.CORBA.portable.InputStream

OutputStream
ServantActivatorPOA._invoke(String method, InputStream input, ResponseHandler handler)
Our implementation will not call this method.
OutputStream
ServantLocatorPOA._invoke(String method, InputStream input, ResponseHandler handler)
Our implementation will not call this method.
Current
CurrentHelper.read(InputStream input)
Not supported for compatibility reasons.
ForwardRequest
ForwardRequestHelper.read(InputStream input)
Read the exception from the CDR intput stream.
POA
POAHelper.read(InputStream input)
This should read POA from the CDR input stream, but, following the specs, it doesnot.
ServantActivator
ServantActivatorHelper.read(InputStream input)
This should read the servant activator, but it cannot be transferred this way as its operations cannot be remote.
ServantLocator
ServantLocatorHelper.read(InputStream input)
This should read the servant locator, but it cannot be transferred this way as its operations cannot be remote.

Uses in package org.omg.Messaging

Methods with parameter type org.omg.CORBA.portable.InputStream

short
SyncScopeHelper.read(InputStream istream)
Delegates call to InputStream.read_short().

Uses in package org.omg.PortableServer.POAManagerPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

AdapterInactive
AdapterInactiveHelper.read(InputStream input)
Read the exception from the CDR intput stream.

Uses in package org.omg.CosNaming.NamingContextPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

void
AlreadyBoundHolder._read(InputStream in)
Fill in the stored value, reading it from the given CDR stream.
void
CannotProceedHolder._read(InputStream i)
Fill in the stored value, reading it from the given CDR stream.
void
InvalidNameHolder._read(InputStream in)
Fill in the stored value, reading it from the given CDR stream.
void
NotEmptyHolder._read(InputStream i)
Fill in the stored value, reading it from the given CDR stream.
void
NotFoundHolder._read(InputStream in)
Fill in the stored value, reading it from the given CDR stream.
void
NotFoundReasonHolder._read(InputStream in)
Read the holder from the CDR input stream.
AlreadyBound
AlreadyBoundHelper.read(InputStream istream)
Read the exception from the given CDR stream.
CannotProceed
CannotProceedHelper.read(InputStream istream)
Read the exception from the given CDR stream.
InvalidName
InvalidNameHelper.read(InputStream istream)
Read the exception from the given CDR stream.
NotEmpty
NotEmptyHelper.read(InputStream istream)
Read the exception from the given CDR stream.
NotFound
NotFoundHelper.read(InputStream istream)
Read the exception from the given CDR stream.
NotFoundReason
NotFoundReasonHelper.read(InputStream istream)
Read the exception from the given CDR stream.

Uses in package gnu.CORBA.Interceptor

Methods with parameter type org.omg.CORBA.portable.InputStream

void
ForwardRequestHolder._read(InputStream input)
Fill in the value by data from the CDR stream.

Uses in package org.omg.DynamicAny.DynAnyFactoryPackage

Methods with parameter type org.omg.CORBA.portable.InputStream

InconsistentTypeCode
InconsistentTypeCodeHelper.read(InputStream input)
Read the exception from the CDR intput stream.

Uses in package org.omg.DynamicAny

Methods with parameter type org.omg.CORBA.portable.InputStream

Any[]
AnySeqHelper.read(InputStream input)
Delegates call to AnySeqHelper.read(InputStream).
DynAnyFactory
DynAnyFactoryHelper.read(InputStream input)
This should read DynAnyFactory from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynAny
DynAnyHelper.read(InputStream input)
This should read DynAny from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynAny[]
DynAnySeqHelper.read(InputStream input)
The method should read this object from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynArray
DynArrayHelper.read(InputStream input)
This should read DynArray from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynEnum
DynEnumHelper.read(InputStream input)
This should read DynEnum from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynFixed
DynFixedHelper.read(InputStream input)
This should read DynFixed from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynSequence
DynSequenceHelper.read(InputStream input)
This should read DynSequence from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynStruct
DynStructHelper.read(InputStream input)
This should read DynStruct from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynUnion
DynUnionHelper.read(InputStream input)
This should read DynUnion from the CDR input stream, but (following the JDK 1.5 API) it does not.
DynValue
DynValueHelper.read(InputStream input)
This should read DynValue from the CDR input stream, but (following the JDK 1.5 API) it does not.
String
FieldNameHelper.read(InputStream istream)
Calls InputStream.read_string().
NameDynAnyPair
NameDynAnyPairHelper.read(InputStream input)
The method should read this object from the CDR input stream, but (following the JDK 1.5 API) it does not.
NameDynAnyPair[]
NameDynAnyPairSeqHelper.read(InputStream input)
The method should read this object from the CDR input stream, but (following the JDK 1.5 API) it does not.
NameValuePair
NameValuePairHelper.read(InputStream input)
Read the structure from the CDR intput stream.
NameValuePair[]
NameValuePairSeqHelper.read(InputStream input)
Read the sequence from the CDR intput stream.

Uses in package gnu.CORBA.CDR

Classes derived from org.omg.CORBA.portable.InputStream

class
AbstractCdrInput
A simple CORBA CDR (common data representation) input stream, reading data from the given InputStream.
class
BufferredCdrInput
The CDR input stream that reads data from the byte buffer.
class
HeadlessInput
Substitutes the main stream in factories when the header is already behind.

Constructors with parameter type org.omg.CORBA.portable.InputStream

HeadlessInput.HeadlessInput(BufferredCdrInput a_stream, InputStream inheritSettings)
Create an instance, reading from the given buffer.

Methods with parameter type org.omg.CORBA.portable.InputStream

Serializable
Vio.read(InputStream input)
Read the value base from the given input stream.
Serializable
Vio.read(InputStream input, Class<T> value_class)
Read the value base from the given input stream when the value base class is available.
Object
Vio.read(InputStream input, Object value_instance, BoxedValueHelper helper)
Read the value base from the given input stream when the unitialised instance is available.
Serializable
Vio.read(InputStream input, String repository_id)
Read the value base from the given input stream.
Serializable
Vio.read(InputStream input, BoxedValueHelper helper)
Read using provided boxed value helper.
int
Vio.readNestedValue(int value_tag, InputStream input, BufferedCdrOutput output, int level)
Read the chunked nested value from the given input stream, transferring the contents to the given output stream.
Serializable
Vio.readValue(InputStream input, int position, Object value, BoxedValueHelper helper, String id, String[] ids, String codebase)
Read the value (the header must be behind).
Serializable
IDLTypeHelper.read_value(InputStream input)
Read an instance from the stream.

Methods with return type org.omg.CORBA.portable.InputStream

InputStream
BufferedCdrOutput.create_input_stream()
Return the input stream that reads the previously written values.
InputStream
EncapsulationStream.create_input_stream()
Return the input stream that reads the previously written values.

Overview Package Class Use Source Tree Index Deprecated About