This document describes how you can monitor the status of networked printers. Specifically, HP printers that have internal/external JetDirect cards/devices, or other print servers (like the Troy PocketPro 100S or the Netgear PS101) that support the JetDirect protocol.

The check_hpjd plugin (which is part of the standard Nagios plugins distribution) allows you to monitor the status of JetDirect-capable printers which have SNMP enabled. The plugin is capable of detecting the following printer states:

Monitoring the status of a networked printer is pretty simple. JetDirect-enabled printers usually have SNMP enabled, which allows Icinga to monitor their status using the check_hpjd plugin.

There are several steps you'll need to follow in order to monitor a new network printer. They are:

To make your life a bit easier, a few configuration tasks have already been done for you:

The above-mentioned config files can be found in the /usr/local/icinga/etc/objects/ directory. You can modify the definitions in these and other definitions to suit your needs better if you'd like. However, we'd recommend waiting until you're more familiar with configuring Icinga before doing so. For the time being, just follow the directions outlined below and you'll be monitoring your network printers in no time.

The first time you configure Icinga to monitor a network printer, you'll need to do a bit of extra work. Remember, you only need to do this for the *first* printer you monitor.

Edit the main Icinga config file.

#> vi /usr/local/icinga/etc/icinga.cfg

Remove the leading hash (#) sign from the following line in the main configuration file:

 #cfg_file=/usr/local/icinga/etc/objects/printer.cfg

Save the file and exit.

What did you just do? You told Icinga to look to the /usr/local/icinga/etc/objects/printer.cfg to find additional object definitions. That's where you'll be adding host and service definitions for the printer. That configuration file already contains some sample host, hostgroup, and service definitions. For the *first* printer you monitor, you can simply modify the sample host and service definitions in that file, rather than creating new ones.

You'll need to create some object definitions in order to monitor a new printer.

Open the printer.cfg file for editing.

#> vi /usr/local/icinga/etc/objects/printer.cfg

Add a new host definition for the networked printer that you're going to monitor. If this is the *first* printer you're monitoring, you can simply modify the sample host definition in printer.cfg. Change the host_name, alias, and address fields to appropriate values for the printer.

 define host{
        use             generic-printer ; Inherit default values from a template
        host_name       hplj2605dn      ; The name we're giving to this printer
        alias           HP LaserJet 2605dn      ; A longer name associated with the printer
        address         192.168.1.30            ; IP address of the printer
        hostgroups      allhosts                ; Host groups this printer is associated with
        }

Now you can add some service definitions (to the same configuration file) to monitor different aspects of the printer. If this is the *first* printer you're monitoring, you can simply modify the sample service definition in printer.cfg.

Add the following service definition to check the status of the printer. The service uses the check_hpjd plugin to check the status of the printer every 10 minutes by default. The SNMP community string used to query the printer is "public" in this example.

 define service{
        use                   generic-service   ; Inherit values from a template
        host_name             hplj2605dn        ; The name of the host the service is associated with
        service_description   Printer Status    ; The service description
        check_command         check_hpjd!-C public    ; The command used to monitor the service
        check_interval        10      ; Check the service every 10 minutes under normal conditions
        retry_interval        1       ; Re-check every minute until its final/hard state is determined
        }

Add the following service definition to ping the printer every 10 minutes by default. This is useful for monitoring RTA, packet loss, and general network connectivity.

 define service{
        use                     generic-service
        host_name               hplj2605dn
        service_description     PING
        check_command           check_ping!3000.0,80%!5000.0,100%
        check_interval          10
        retry_interval          1
        }

Save the file.

Once you've added the new host and service definitions to the printer.cfg file, you're ready to start monitoring the printer. To do this, you'll need to verify your configuration and restart Icinga.

If the verification process produces any errors messages, fix your configuration file before continuing. Make sure that you don't (re)start Icinga until the verification process completes without any errors!