Tool 130: Brute force ftp client

Description:

  This tool successively tries couples of login and passwords in order
  to find matching authentication credentials.
  
  Parameter --login defines the logins to try. To check several logins,
  parameter --login-file is the file containing logins (one per line).
  Parameter --password-file is the file containing passwords (1/line).
  Parameter --stopatfirst indicates to stop when first match is found.
  Parameter --numthread defines the number of threads (simultaneous
  running checks) to use.
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses (in this case, tool have
  to be run with admin privilege in order to sniff and spoof at
  Ethernet level).
   

Usage:

  netwox 130 -i ip [-L login] -w file [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-p port] [-o ip4opts] [-O ip6exts] [-l file] [-T uint32] [-s|+s] [-n uint32] [-v|+v]

Parameters:

parameter description example
-i|--dst-ip ip destination IP address 5.6.7.8
-L|--login login login  
-w|--password-file file password file passwordfile.txt
-d|--device device device name Eth0
-E|--src-eth eth source ethernet address 0:2:3:4:5:6
-e|--dst-eth eth destination ethernet address 0:8:9:a:b:c
-I|--src-ip ip source IP address 192.168.100.200
-P|--src-port port source port number 0
-p|--dst-port port destination port number 21
-o|--ip4opts ip4opts IPv4 options  
-O|--ip6exts ip6exts IPv6 extensions  
-l|--login-file file login file loginfile.txt
-T|--timeout uint32 timeout in milliseconds 60000
-s|--stopatfirst|+s|--no-stopatfirst stop at first valid login found  
-n|--numthread uint32 number of threads to launch 5
-v|--verbose|+v|--no-verbose be verbose This boolean is set.
Use + or --no- to unset it.

Examples:

  netwox 130 -i "5.6.7.8" -w "passwordfile.txt"

  netwox 130 --dst-ip "5.6.7.8" --password-file "passwordfile.txt"