Tool 188: SYSLOG server

Description:

  This tool is a SYSLOG client showing messages (--showscreen) or
  logging them in a file (--logfile).
  
  Parameter --src-port defines the local port number to listen on.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --iptype defines which kind of IP address to use
  when --src-ip is unset (accepted values: ip4 and ip6).
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device and --src-eth permits to create
  a virtual server using fake addresses (in this case, tool have to be
  run with admin privilege in order to sniff and spoof at Ethernet
  level).
  Parameter --allowed-clients lists the IP addresses or hosts allowed
  to connect.
  
  This tool may need to be run with admin privilege in order to listen
  on a small port number (port<1024).
   

Synonyms:

  syslogd

Usage:

  netwox 188 [-s|+s] [-l file] [-d device] [-E eth] [-I ip] [-P port] [-o ip4opts] [-O ip6exts] [-t iptype] [-c ips]

Parameters:

parameter description example
-s|--showscreen|+s|--no-showscreen show data to screen This boolean is set.
Use + or --no- to unset it.
-l|--logfile file log file dstfile.txt
-d|--device device device name Eth0
-E|--src-eth eth source ethernet address 0:2:3:4:5:6
-I|--src-ip ip source IP address 192.168.100.200
-P|--src-port port source port number 514
-o|--ip4opts ip4opts IPv4 options  
-O|--ip6exts ip6exts IPv6 extensions  
-t|--iptype iptype type to use when src-ip is unset ip4
-c|--allowed-clients ips clients allowed to connect all

Example:

  netwox 188