Tool 47: Spoof of packet samples : fragment, ip4opt:ipts

Description:

  This tool sends hardcoded packet samples. Samples are (--sample
  defines number): 1=udp_syslog, 2=tcp_syn, 3=tcpsynack, 4=tcpack,
  5=ping.
  Packets contain IP4 options and can be fragmented before been sent.
  IP4 options contains an IP Timestamp option.
  Parameter --spoofip indicates how to generate link layer for spoofing.
  Values 'best', 'link' or 'raw' are common choices for --spoofip. Here
  is the list of accepted values:
   - 'raw' means to spoof at IP4/IP6 level (it uses system IP stack). If
     a firewall is installed, or on some systems, this might not work.
   - 'linkf' means to spoof at link level (currently, only Ethernet is
     supported). The 'f' means to Fill source Ethernet address.
     However, if source IP address is spoofed, it might be impossible
     to Fill it. So, linkf will not work: use linkb or linkfb instead.
   - 'linkb' means to spoof at link level. The 'b' means to left a Blank
     source Ethernet address (0:0:0:0:0:0, do not try to Fill it).
   - 'linkfb' means to spoof at link level. The 'f' means to try to Fill
     source Ethernet address, but if it is not possible, it is left
     Blank.
   - 'rawlinkf' means to try 'raw', then try 'linkf'
   - 'rawlinkb' means to try 'raw', then try 'linkb'
   - 'rawlinkfb' means to try 'raw', then try 'linkfb'
   - 'linkfraw' means to try 'linkf', then try 'raw'
   - 'linkbraw' means to try 'linkb', then try 'raw'
   - 'linkfbraw' means to try 'linkfb', then try 'raw'
   - 'link' is an alias for 'linkfb'
   - 'rawlink' is an alias for 'rawlinkfb'
   - 'linkraw' is an alias for 'linkfbraw'
   - 'best' is an alias for 'linkraw'. It should work in all cases.
  
  This tool may need to be run with admin privilege in order to spoof.
   

Synonyms:

  ip4 option, send

Usage:

  netwox 47 [-s ip] [-d ip] [-S port] [-D port] [-n uint32] [-f uint32] [-x|+x] [-a spoofip]

Parameters:

parameter description example
-s|--ip4-src ip IP4 src 192.168.100.200
-d|--ip4-dst ip IP4 dst 5.6.7.8
-S|--tcp-src port TCP port src 80
-D|--tcp-dst port TCP port dst 80
-n|--sample uint32 number of sample (1 to n) 1
-f|--fragsize uint32 fragment size (0=nofrag) 0
-x|--display|+x|--no-display display  
-a|--spoofip spoofip IP spoof initialization type best

Example:

  netwox 47