Tool 50: Ping ICMP (EthIP spoof)
Description:
This tool checks if a host is up. It's done sending a probe packet and
expecting a reply.
This tool sends an ICMP Echo Request to a computer. If host is up and
permitting ping, it will send back an ICMP Echo Reply.
This tool also permits to use fake Ethernet and IP addresses.
This tool may need to be run with admin privilege in order to sniff
and spoof.
Usage:
netwox 50 -i ip [-d device] [-E eth] [-e eth] [-I ip] [-c uint32] [-m uint32] [-b|+b] [-1|+1]
Parameters:
| parameter |
description |
example |
| -i|--dst-ip ip |
destination IP address |
5.6.7.8 |
| -d|--device device |
spoof device |
Eth0 |
| -E|--src-eth eth |
source ethernet address |
0:a:a:a:a:a |
| -e|--dst-eth eth |
destination ethernet address |
0:b:b:b:b:b |
| -I|--src-ip ip |
source IP address |
1.2.3.4 |
| -c|--max-count uint32 |
max requests |
4294967295 |
| -m|--max-ms uint32 |
max millisecond wait |
1000 |
| -b|--beep|+b|--no-beep |
beep if reached |
|
| -1|--display01|+1|--no-display01 |
display only 0 or 1 |
|
Examples:
netwox 50 -i "5.6.7.8"
netwox 50 --dst-ip "5.6.7.8"