Tool 54: Ping UDP (EthIp spoof)
Description:
This tool checks if a host is up. It's done sending a probe packet and
expecting a reply.
This tool sends an UDP packet to a computer. If host permits UDP, it
will send back an ICMP error (if port is closed), or send back nothing
(if port is open). So, it's important to understand UDP port has to be
closed for computer to return something.
This tool also permits to use fake Ethernet and IP addresses.
This tool may need to be run with admin privilege in order to sniff
and spoof.
Usage:
netwox 54 -i ip [-d device] [-E eth] [-e eth] [-I ip] [-p port] [-c uint32] [-m uint32] [-b|+b] [-1|+1]
Parameters:
| parameter |
description |
example |
| -i|--dst-ip ip |
destination IP address |
5.6.7.8 |
| -d|--device device |
device name |
Eth0 |
| -E|--src-eth eth |
source ethernet address |
0:a:a:a:a:a |
| -e|--dst-eth eth |
destination ethernet address |
0:b:b:b:b:b |
| -I|--src-ip ip |
source IP address |
1.2.3.4 |
| -p|--dst-port port |
destination port number |
80 |
| -c|--max-count uint32 |
max requests |
4294967295 |
| -m|--max-ms uint32 |
max millisecond wait |
1000 |
| -b|--beep|+b|--no-beep |
beep if reached |
|
| -1|--display01|+1|--no-display01 |
display only 0 or 1 |
|
Examples:
netwox 54 -i "5.6.7.8"
netwox 54 --dst-ip "5.6.7.8"