Tool 89: TCP server

Description:

  This tool listens on a TCP port. Use tool 87 to connect to it.
  
  Parameter --src-port defines the local port number to listen on.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --iptype defines which kind of IP address to use
  when --src-ip is unset (accepted values: ip4 and ip6).
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device and --src-eth permits to create
  a virtual server using fake addresses (in this case, tool have to be
  run with admin privilege in order to sniff and spoof at Ethernet
  level).
  Parameter --encode defines how to display data (common values: data,
  dump, mixed).
  Parameter --decode defines how keyboard data is entered (common
  values: data, mixed).
   

Synonyms:

  nc, netcat

Usage:

  netwox 89 -P port [-d device] [-E eth] [-I ip] [-o ip4opts] [-O ip6exts] [-t iptype] [-k decode] [-n encode]

Parameters:

parameter description example
-P|--src-port port source port number 1234
-d|--device device device name Eth0
-E|--src-eth eth source ethernet address 0:2:3:4:5:6
-I|--src-ip ip source IP address 192.168.100.200
-o|--ip4opts ip4opts IPv4 options  
-O|--ip6exts ip6exts IPv6 extensions  
-t|--iptype iptype type to use when src-ip is unset ip4
-k|--decode decode how keyboard data is entered data
-n|--encode encode how network data is displayed data

Examples:

  netwox 89 -P "1234"

  netwox 89 --src-port "1234"