Tool 96: TCP remote administration client (put file)

Description:

  This tool put a file to server of tool 93.
  
  Parameter --src-file contains the local filename.
  Parameter --file defines the remote filename to write.
  Parameter --password defines the password (same as server's password).
  Parameter --cypher defines if data has to be encrypted. Please note
  this is not very strong. If known text is used, this algorithm can be
  cracked.
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses (in this case, tool have
  to be run with admin privilege in order to sniff and spoof at
  Ethernet level).
   

Usage:

  netwox 96 -i ip -p port -f file -F file [-w password] [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-o ip4opts] [-O ip6exts] [-x|+x] [-T uint32]

Parameters:

parameter description example
-i|--dst-ip ip destination IP address 5.6.7.8
-p|--dst-port port destination port number 80
-f|--src-file file source filename srcfile.txt
-F|--file file filename file.txt
-w|--password password password netwox
-d|--device device device name Eth0
-E|--src-eth eth source ethernet address 0:2:3:4:5:6
-e|--dst-eth eth destination ethernet address 0:8:9:a:b:c
-I|--src-ip ip source IP address 192.168.100.200
-P|--src-port port source port number 0
-o|--ip4opts ip4opts IPv4 options  
-O|--ip6exts ip6exts IPv6 extensions  
-x|--cypher|+x|--no-cypher if data is encrypted  
-T|--timeout uint32 timeout in seconds 100

Examples:

  netwox 96 -i "5.6.7.8" -p "80" -f "srcfile.txt" -F "file.txt"

  netwox 96 --dst-ip "5.6.7.8" --dst-port "80" --src-file "srcfile.txt" --file "file.txt"