| |
- Method resolution order:
- EmailSettingsService
- gdata.apps.service.PropertyService
- gdata.service.GDataService
- atom.service.AtomService
- __builtin__.object
Methods defined here:
- CreateFilter(self, username, from_=None, to=None, subject=None, has_the_word=None, does_not_have_the_word=None, has_attachment=None, label=None, should_mark_as_read=None, should_archive=None)
- Create a filter.
Args:
username: User to create filter for.
from_: Filter from string.
to: Filter to string.
subject: Filter subject.
has_the_word: Words to filter in.
does_not_have_the_word: Words to filter out.
has_attachment: Boolean for message having attachment.
label: Label to apply.
should_mark_as_read: Boolean for marking message as read.
should_archive: Boolean for archiving message.
Returns:
A dict containing the result of the create operation.
- CreateLabel(self, username, label)
- Create a label.
Args:
username: User to create label for.
label: Label to create.
Returns:
A dict containing the result of the create operation.
- CreateSendAsAlias(self, username, name, address, reply_to=None, make_default=None)
- Create alias to send mail as.
Args:
username: User to create alias for.
name: Name of alias.
address: Email address to send from.
reply_to: Email address to reply to.
make_default: Boolean for whether this is the new default sending alias.
Returns:
A dict containing the result of the create operation.
- UpdateForwarding(self, username, enable, forward_to=None, action=None)
- Update forwarding settings.
Args:
username: User to update forwarding for.
enable: Boolean whether to enable this forwarding rule.
forward_to: Email address to forward to.
action: Action to take after forwarding.
Returns:
A dict containing the result of the update operation.
- UpdateGeneral(self, username, page_size=None, shortcuts=None, arrows=None, snippets=None, unicode=None)
- Update general settings.
Args:
username: User to update general settings for.
page_size: Number of messages to show.
shortcuts: Boolean whether shortcuts are enabled.
arrows: Boolean whether arrows are enabled.
snippets: Boolean whether snippets are enabled.
unicode: Wheter unicode is enabled.
Returns:
A dict containing the result of the update operation.
- UpdateImap(self, username, enable)
- Update IMAP settings.
Args:
username: User to update IMAP settings for.
enable: Boolean whether to enable IMAP.
Returns:
A dict containing the result of the update operation.
- UpdateLanguage(self, username, language)
- Update user interface language.
Args:
username: User to update language for.
language: Language code.
Returns:
A dict containing the result of the update operation.
- UpdatePop(self, username, enable, enable_for=None, action=None)
- Update POP3 settings.
Args:
username: User to update POP3 settings for.
enable: Boolean whether to enable POP3.
enable_for: Which messages to make available via POP3.
action: Action to take after user retrieves email via POP3.
Returns:
A dict containing the result of the update operation.
- UpdateSignature(self, username, signature)
- Update signature.
Args:
username: User to update signature for.
signature: Signature string.
Returns:
A dict containing the result of the update operation.
- UpdateVacation(self, username, enable, subject=None, message=None, contacts_only=None)
- Update vacation settings.
Args:
username: User to update vacation settings for.
enable: Boolean whether to enable vacation responses.
subject: Vacation message subject.
message: Vacation message body.
contacts_only: Boolean whether to send message only to contacts.
Returns:
A dict containing the result of the update operation.
- UpdateWebClipSettings(self, username, enable)
- Update WebClip Settings
Args:
username: User to update forwarding for.
enable: Boolean whether to enable Web Clip.
Returns:
A dict containing the result of the update operation.
Methods inherited from gdata.apps.service.PropertyService:
- AddAllElementsFromAllPages(self, link_finder, func)
- retrieve all pages and add all elements
- __init__(self, email=None, password=None, domain=None, source=None, server='apps-apis.google.com', additional_headers=None)
Methods inherited from gdata.service.GDataService:
- AuthSubTokenInfo(self)
- Fetches the AuthSub token's metadata from the server.
Raises:
NonAuthSubToken if the user's auth token is not an AuthSub token
- ClientLogin(self, username, password, account_type=None, service=None, auth_service_url=None, source=None, captcha_token=None, captcha_response=None)
- Convenience method for authenticating using ProgrammaticLogin.
Sets values for email, password, and other optional members.
Args:
username:
password:
account_type: string (optional)
service: string (optional)
auth_service_url: string (optional)
captcha_token: string (optional)
captcha_response: string (optional)
- Delete(self, uri, extra_headers=None, url_params=None, escape_params=True, redirects_remaining=4)
- Deletes the entry at the given URI.
Args:
uri: string The URI of the entry to be deleted. Example:
'/base/feeds/items/ITEM-ID'
extra_headers: dict (optional) HTTP headers which are to be included.
The client automatically sets the Content-Type and
Authorization headers.
url_params: dict (optional) Additional URL parameters to be included
in the URI. These are translated into query arguments
in the form '&dict_key=value&...'.
Example: {'max-results': '250'} becomes &max-results=250
escape_params: boolean (optional) If false, the calling code has already
ensured that the query will form a valid URL (all
reserved characters have been escaped). If true, this
method will escape the query and any URL parameters
provided.
Returns:
True if the entry was deleted.
- FetchOAuthRequestToken(self, scopes=None, extra_parameters=None, request_url='https://www.google.com/accounts/OAuthGetRequestToken', oauth_callback=None)
- Fetches and sets the OAuth request token and returns it.
Args:
scopes: string or list of string base URL(s) of the service(s) to be
accessed. If None, then this method tries to determine the
scope(s) from the current service.
extra_parameters: dict (optional) key-value pairs as any additional
parameters to be included in the URL and signature while making a
request for fetching an OAuth request token. All the OAuth parameters
are added by default. But if provided through this argument, any
default parameters will be overwritten. For e.g. a default parameter
oauth_version 1.0 can be overwritten if
extra_parameters = {'oauth_version': '2.0'}
request_url: Request token URL. The default is
'https://www.google.com/accounts/OAuthGetRequestToken'.
oauth_callback: str (optional) If set, it is assume the client is using
the OAuth v1.0a protocol where the callback url is sent in the
request token step. If the oauth_callback is also set in
extra_params, this value will override that one.
Returns:
The fetched request token as a gdata.auth.OAuthToken object.
Raises:
FetchingOAuthRequestTokenFailed if the server responded to the request
with an error.
- GenerateAuthSubURL(self, next, scope, secure=False, session=True, domain='default')
- Generate a URL at which the user will login and be redirected back.
Users enter their credentials on a Google login page and a token is sent
to the URL specified in next. See documentation for AuthSub login at:
http://code.google.com/apis/accounts/docs/AuthSub.html
Args:
next: string The URL user will be sent to after logging in.
scope: string or list of strings. The URLs of the services to be
accessed.
secure: boolean (optional) Determines whether or not the issued token
is a secure token.
session: boolean (optional) Determines whether or not the issued token
can be upgraded to a session token.
- GenerateOAuthAuthorizationURL(self, request_token=None, callback_url=None, extra_params=None, include_scopes_in_callback=False, scopes_param_prefix='oauth_token_scope', request_url='https://www.google.com/accounts/OAuthAuthorizeToken')
- Generates URL at which user will login to authorize the request token.
Args:
request_token: gdata.auth.OAuthToken (optional) OAuth request token.
If not specified, then the current token will be used if it is of
type <gdata.auth.OAuthToken>, else it is found by looking in the
token_store by looking for a token for the current scope.
callback_url: string (optional) The URL user will be sent to after
logging in and granting access.
extra_params: dict (optional) Additional parameters to be sent.
include_scopes_in_callback: Boolean (default=False) if set to True, and
if 'callback_url' is present, the 'callback_url' will be modified to
include the scope(s) from the request token as a URL parameter. The
key for the 'callback' URL's scope parameter will be
OAUTH_SCOPE_URL_PARAM_NAME. The benefit of including the scope URL as
a parameter to the 'callback' URL, is that the page which receives
the OAuth token will be able to tell which URLs the token grants
access to.
scopes_param_prefix: string (default='oauth_token_scope') The URL
parameter key which maps to the list of valid scopes for the token.
This URL parameter will be included in the callback URL along with
the scopes of the token as value if include_scopes_in_callback=True.
request_url: Authorization URL. The default is
'https://www.google.com/accounts/OAuthAuthorizeToken'.
Returns:
A string URL at which the user is required to login.
Raises:
NonOAuthToken if the user's request token is not an OAuth token or if a
request token was not available.
- Get(self, uri, extra_headers=None, redirects_remaining=4, encoding='UTF-8', converter=None)
- Query the GData API with the given URI
The uri is the portion of the URI after the server value
(ex: www.google.com).
To perform a query against Google Base, set the server to
'base.google.com' and set the uri to '/base/feeds/...', where ... is
your query. For example, to find snippets for all digital cameras uri
should be set to: '/base/feeds/snippets?bq=digital+camera'
Args:
uri: string The query in the form of a URI. Example:
'/base/feeds/snippets?bq=digital+camera'.
extra_headers: dictionary (optional) Extra HTTP headers to be included
in the GET request. These headers are in addition to
those stored in the client's additional_headers property.
The client automatically sets the Content-Type and
Authorization headers.
redirects_remaining: int (optional) Tracks the number of additional
redirects this method will allow. If the service object receives
a redirect and remaining is 0, it will not follow the redirect.
This was added to avoid infinite redirect loops.
encoding: string (optional) The character encoding for the server's
response. Default is UTF-8
converter: func (optional) A function which will transform
the server's results before it is returned. Example: use
GDataFeedFromString to parse the server response as if it
were a GDataFeed.
Returns:
If there is no ResultsTransformer specified in the call, a GDataFeed
or GDataEntry depending on which is sent from the server. If the
response is niether a feed or entry and there is no ResultsTransformer,
return a string. If there is a ResultsTransformer, the returned value
will be that of the ResultsTransformer function.
- GetAuthSubToken(self)
- Returns the AuthSub token as a string.
If the token is an gdta.auth.AuthSubToken, the Authorization Label
("AuthSub token") is removed.
This method examines the current_token to see if it is an AuthSubToken
or SecureAuthSubToken. If not, it searches the token_store for a token
which matches the current scope.
The current scope is determined by the service name string member.
Returns:
If the current_token is set to an AuthSubToken/SecureAuthSubToken,
return the token string. If there is no current_token, a token string
for a token which matches the service object's default scope is returned.
If there are no tokens valid for the scope, returns None.
- GetClientLoginToken(self)
- Returns the token string for the current token or a token matching the
service scope.
If the current_token is a ClientLoginToken, the token string for
the current token is returned. If the current_token is not set, this method
searches for a token in the token_store which is valid for the service
object's current scope.
The current scope is determined by the service name string member.
The token string is the end of the Authorization header, it doesn not
include the ClientLogin label.
- GetEntry(self, uri, extra_headers=None)
- Query the GData API with the given URI and receive an Entry.
See also documentation for gdata.service.Get
Args:
uri: string The query in the form of a URI. Example:
'/base/feeds/snippets?bq=digital+camera'.
extra_headers: dictionary (optional) Extra HTTP headers to be included
in the GET request. These headers are in addition to
those stored in the client's additional_headers property.
The client automatically sets the Content-Type and
Authorization headers.
Returns:
A GDataEntry built from the XML in the server's response.
- GetFeed(self, uri, extra_headers=None, converter=<function GDataFeedFromString>)
- Query the GData API with the given URI and receive a Feed.
See also documentation for gdata.service.Get
Args:
uri: string The query in the form of a URI. Example:
'/base/feeds/snippets?bq=digital+camera'.
extra_headers: dictionary (optional) Extra HTTP headers to be included
in the GET request. These headers are in addition to
those stored in the client's additional_headers property.
The client automatically sets the Content-Type and
Authorization headers.
Returns:
A GDataFeed built from the XML in the server's response.
- GetGeneratorFromLinkFinder(self, link_finder, func, num_retries=3, delay=1, backoff=2)
- returns a generator for pagination
- GetMedia(self, uri, extra_headers=None)
- Returns a MediaSource containing media and its metadata from the given
URI string.
- GetNext(self, feed)
- Requests the next 'page' of results in the feed.
This method uses the feed's next link to request an additional feed
and uses the class of the feed to convert the results of the GET request.
Args:
feed: atom.Feed or a subclass. The feed should contain a next link and
the type of the feed will be applied to the results from the
server. The new feed which is returned will be of the same class
as this feed which was passed in.
Returns:
A new feed representing the next set of results in the server's feed.
The type of this feed will match that of the feed argument.
- GetOAuthInputParameters(self)
- GetWithRetries(self, uri, extra_headers=None, redirects_remaining=4, encoding='UTF-8', converter=None, num_retries=3, delay=1, backoff=2, logger=None)
- This is a wrapper method for Get with retrying capability.
To avoid various errors while retrieving bulk entities by retrying
specified times.
Note this method relies on the time module and so may not be usable
by default in Python2.2.
Args:
num_retries: Integer; the retry count.
delay: Integer; the initial delay for retrying.
backoff: Integer; how much the delay should lengthen after each failure.
logger: An object which has a debug(str) method to receive logging
messages. Recommended that you pass in the logging module.
Raises:
ValueError if any of the parameters has an invalid value.
RanOutOfTries on failure after number of retries.
- Post(self, data, uri, extra_headers=None, url_params=None, escape_params=True, redirects_remaining=4, media_source=None, converter=None)
- Insert or update data into a GData service at the given URI.
Args:
data: string, ElementTree._Element, atom.Entry, or gdata.GDataEntry The
XML to be sent to the uri.
uri: string The location (feed) to which the data should be inserted.
Example: '/base/feeds/items'.
extra_headers: dict (optional) HTTP headers which are to be included.
The client automatically sets the Content-Type,
Authorization, and Content-Length headers.
url_params: dict (optional) Additional URL parameters to be included
in the URI. These are translated into query arguments
in the form '&dict_key=value&...'.
Example: {'max-results': '250'} becomes &max-results=250
escape_params: boolean (optional) If false, the calling code has already
ensured that the query will form a valid URL (all
reserved characters have been escaped). If true, this
method will escape the query and any URL parameters
provided.
media_source: MediaSource (optional) Container for the media to be sent
along with the entry, if provided.
converter: func (optional) A function which will be executed on the
server's response. Often this is a function like
GDataEntryFromString which will parse the body of the server's
response and return a GDataEntry.
Returns:
If the post succeeded, this method will return a GDataFeed, GDataEntry,
or the results of running converter on the server's result body (if
converter was specified).
- PostOrPut(self, verb, data, uri, extra_headers=None, url_params=None, escape_params=True, redirects_remaining=4, media_source=None, converter=None)
- Insert data into a GData service at the given URI.
Args:
verb: string, either 'POST' or 'PUT'
data: string, ElementTree._Element, atom.Entry, or gdata.GDataEntry The
XML to be sent to the uri.
uri: string The location (feed) to which the data should be inserted.
Example: '/base/feeds/items'.
extra_headers: dict (optional) HTTP headers which are to be included.
The client automatically sets the Content-Type,
Authorization, and Content-Length headers.
url_params: dict (optional) Additional URL parameters to be included
in the URI. These are translated into query arguments
in the form '&dict_key=value&...'.
Example: {'max-results': '250'} becomes &max-results=250
escape_params: boolean (optional) If false, the calling code has already
ensured that the query will form a valid URL (all
reserved characters have been escaped). If true, this
method will escape the query and any URL parameters
provided.
media_source: MediaSource (optional) Container for the media to be sent
along with the entry, if provided.
converter: func (optional) A function which will be executed on the
server's response. Often this is a function like
GDataEntryFromString which will parse the body of the server's
response and return a GDataEntry.
Returns:
If the post succeeded, this method will return a GDataFeed, GDataEntry,
or the results of running converter on the server's result body (if
converter was specified).
- ProgrammaticLogin(self, captcha_token=None, captcha_response=None)
- Authenticates the user and sets the GData Auth token.
Login retreives a temporary auth token which must be used with all
requests to GData services. The auth token is stored in the GData client
object.
Login is also used to respond to a captcha challenge. If the user's login
attempt failed with a CaptchaRequired error, the user can respond by
calling Login with the captcha token and the answer to the challenge.
Args:
captcha_token: string (optional) The identifier for the captcha challenge
which was presented to the user.
captcha_response: string (optional) The user's answer to the captch
challenge.
Raises:
CaptchaRequired if the login service will require a captcha response
BadAuthentication if the login service rejected the username or password
Error if the login service responded with a 403 different from the above
- Put(self, data, uri, extra_headers=None, url_params=None, escape_params=True, redirects_remaining=3, media_source=None, converter=None)
- Updates an entry at the given URI.
Args:
data: string, ElementTree._Element, or xml_wrapper.ElementWrapper The
XML containing the updated data.
uri: string A URI indicating entry to which the update will be applied.
Example: '/base/feeds/items/ITEM-ID'
extra_headers: dict (optional) HTTP headers which are to be included.
The client automatically sets the Content-Type,
Authorization, and Content-Length headers.
url_params: dict (optional) Additional URL parameters to be included
in the URI. These are translated into query arguments
in the form '&dict_key=value&...'.
Example: {'max-results': '250'} becomes &max-results=250
escape_params: boolean (optional) If false, the calling code has already
ensured that the query will form a valid URL (all
reserved characters have been escaped). If true, this
method will escape the query and any URL parameters
provided.
converter: func (optional) A function which will be executed on the
server's response. Often this is a function like
GDataEntryFromString which will parse the body of the server's
response and return a GDataEntry.
Returns:
If the put succeeded, this method will return a GDataFeed, GDataEntry,
or the results of running converter on the server's result body (if
converter was specified).
- RevokeAuthSubToken(self)
- Revokes an existing AuthSub token.
Raises:
NonAuthSubToken if the user's auth token is not an AuthSub token
- RevokeOAuthToken(self, request_url='https://www.google.com/accounts/AuthSubRevokeToken')
- Revokes an existing OAuth token.
request_url: Token revoke URL. The default is
'https://www.google.com/accounts/AuthSubRevokeToken'.
Raises:
NonOAuthToken if the user's auth token is not an OAuth token.
RevokingOAuthTokenFailed if request for revoking an OAuth token failed.
- SetAuthSubToken(self, token, scopes=None, rsa_key=None)
- Sets the token sent in requests to an AuthSub token.
Sets the current_token and attempts to add the token to the token_store.
Only use this method if you have received a token from the AuthSub
service. The auth token is set automatically when UpgradeToSessionToken()
is used. See documentation for Google AuthSub here:
http://code.google.com/apis/accounts/AuthForWebApps.html
Args:
token: gdata.auth.AuthSubToken or gdata.auth.SecureAuthSubToken or string
The token returned by the AuthSub service. If the token is an
AuthSubToken or SecureAuthSubToken, the scope information stored in
the token is used. If the token is a string, the scopes parameter is
used to determine the valid scopes.
scopes: list of URLs for which the token is valid. This is only used
if the token parameter is a string.
rsa_key: string (optional) Private key required for RSA_SHA1 signature
method. This parameter is necessary if the token is a string
representing a secure token.
- SetClientLoginToken(self, token, scopes=None)
- Sets the token sent in requests to a ClientLogin token.
This method sets the current_token to a new ClientLoginToken and it
also attempts to add the ClientLoginToken to the token_store.
Only use this method if you have received a token from the ClientLogin
service. The auth_token is set automatically when ProgrammaticLogin()
is used. See documentation for Google ClientLogin here:
http://code.google.com/apis/accounts/docs/AuthForInstalledApps.html
Args:
token: string or instance of a ClientLoginToken.
- SetOAuthInputParameters(self, signature_method, consumer_key, consumer_secret=None, rsa_key=None, two_legged_oauth=False, requestor_id=None)
- Sets parameters required for using OAuth authentication mechanism.
NOTE: Though consumer_secret and rsa_key are optional, either of the two
is required depending on the value of the signature_method.
Args:
signature_method: class which provides implementation for strategy class
oauth.oauth.OAuthSignatureMethod. Signature method to be used for
signing each request. Valid implementations are provided as the
constants defined by gdata.auth.OAuthSignatureMethod. Currently
they are gdata.auth.OAuthSignatureMethod.RSA_SHA1 and
gdata.auth.OAuthSignatureMethod.HMAC_SHA1
consumer_key: string Domain identifying third_party web application.
consumer_secret: string (optional) Secret generated during registration.
Required only for HMAC_SHA1 signature method.
rsa_key: string (optional) Private key required for RSA_SHA1 signature
method.
two_legged_oauth: boolean (optional) Enables two-legged OAuth process.
requestor_id: string (optional) User email adress to make requests on
their behalf. This parameter should only be set when two_legged_oauth
is True.
- SetOAuthToken(self, oauth_token)
- Attempts to set the current token and add it to the token store.
The oauth_token can be any OAuth token i.e. unauthorized request token,
authorized request token or access token.
This method also attempts to add the token to the token store.
Use this method any time you want the current token to point to the
oauth_token passed. For e.g. call this method with the request token
you receive from FetchOAuthRequestToken.
Args:
request_token: gdata.auth.OAuthToken OAuth request token.
- UpgradeToOAuthAccessToken(self, authorized_request_token=None, request_url='https://www.google.com/accounts/OAuthGetAccessToken', oauth_version='1.0', oauth_verifier=None)
- Upgrades the authorized request token to an access token and returns it
Args:
authorized_request_token: gdata.auth.OAuthToken (optional) OAuth request
token. If not specified, then the current token will be used if it is
of type <gdata.auth.OAuthToken>, else it is found by looking in the
token_store by looking for a token for the current scope.
request_url: Access token URL. The default is
'https://www.google.com/accounts/OAuthGetAccessToken'.
oauth_version: str (default='1.0') oauth_version parameter. All other
'oauth_' parameters are added by default. This parameter too, is
added by default but here you can override it's value.
oauth_verifier: str (optional) If present, it is assumed that the client
will use the OAuth v1.0a protocol which includes passing the
oauth_verifier (as returned by the SP) in the access token step.
Returns:
Access token
Raises:
NonOAuthToken if the user's authorized request token is not an OAuth
token or if an authorized request token was not available.
TokenUpgradeFailed if the server responded to the request with an
error.
- UpgradeToSessionToken(self, token=None)
- Upgrades a single use AuthSub token to a session token.
Args:
token: A gdata.auth.AuthSubToken or gdata.auth.SecureAuthSubToken
(optional) which is good for a single use but can be upgraded
to a session token. If no token is passed in, the token
is found by looking in the token_store by looking for a token
for the current scope.
Raises:
NonAuthSubToken if the user's auth token is not an AuthSub token
TokenUpgradeFailed if the server responded to the request with an
error.
- upgrade_to_session_token(self, token)
- Upgrades a single use AuthSub token to a session token.
Args:
token: A gdata.auth.AuthSubToken or gdata.auth.SecureAuthSubToken
which is good for a single use but can be upgraded to a
session token.
Returns:
The upgraded token as a gdata.auth.AuthSubToken object.
Raises:
TokenUpgradeFailed if the server responded to the request with an
error.
Data descriptors inherited from gdata.service.GDataService:
- captcha_token
- Get the captcha token for a login request.
- captcha_url
- Get the captcha URL for a login request.
- source
- The source is the name of the application making the request.
It should be in the form company_id-app_name-app_version
Data and other attributes inherited from gdata.service.GDataService:
- auth_token = None
- handler = None
- tokens = None
Methods inherited from atom.service.AtomService:
- UseBasicAuth(self, username, password, for_proxy=False)
- Sets an Authenticaiton: Basic HTTP header containing plaintext.
Deprecated, use use_basic_auth instead.
The username and password are base64 encoded and added to an HTTP header
which will be included in each request. Note that your username and
password are sent in plaintext.
Args:
username: str
password: str
- request(*args, **kwargs)
- # The deprecated_function wraps the actual call to f.
- use_basic_auth(self, username, password, scopes=None)
Data descriptors inherited from atom.service.AtomService:
- __dict__
- dictionary for instance variables (if defined)
- __weakref__
- list of weak references to the object (if defined)
- debug
- If True, HTTP debug information is printed.
- override_token
Data and other attributes inherited from atom.service.AtomService:
- auto_set_current_token = True
- auto_store_tokens = True
- current_token = None
- port = 80
- ssl = False
|