QCameraFocus Class
The QCameraFocus class provides an interface for focus and zoom related camera settings. More...
Header: | #include <QCameraFocus> |
qmake: | QT += multimedia |
Inherits: | QObject |
Public Types
enum | FocusMode { ManualFocus, HyperfocalFocus, InfinityFocus, AutoFocus, ContinuousFocus, MacroFocus } |
flags | FocusModes |
enum | FocusPointMode { FocusPointAuto, FocusPointCenter, FocusPointFaceDetection, FocusPointCustom } |
Properties
|
|
Public Functions
QPointF | customFocusPoint() const |
qreal | digitalZoom() const |
QCameraFocus::FocusModes | focusMode() const |
QCameraFocus::FocusPointMode | focusPointMode() const |
QCameraFocusZoneList | focusZones() const |
bool | isAvailable() const |
bool | isFocusModeSupported(QCameraFocus::FocusModes mode) const |
bool | isFocusPointModeSupported(QCameraFocus::FocusPointMode mode) const |
qreal | maximumDigitalZoom() const |
qreal | maximumOpticalZoom() const |
qreal | opticalZoom() const |
void | setCustomFocusPoint(const QPointF &point) |
void | setFocusMode(QCameraFocus::FocusModes mode) |
void | setFocusPointMode(QCameraFocus::FocusPointMode mode) |
void | zoomTo(qreal optical, qreal digital) |
Signals
void | digitalZoomChanged(qreal value) |
void | focusZonesChanged() |
void | maximumDigitalZoomChanged(qreal zoom) |
void | maximumOpticalZoomChanged(qreal zoom) |
void | opticalZoomChanged(qreal value) |
Protected Functions
virtual | ~QCameraFocus() |
Detailed Description
On hardware that supports it, this class lets you adjust the focus or zoom (both optical and digital). This also includes things like "Macro" mode for close up work (e.g. reading barcodes, or recognising letters), or "touch to focus" - indicating an interesting area of the viewfinder for the hardware to attempt to focus on.
QCameraFocus *focus = camera->focus(); focus->setFocusPointMode(QCameraFocus::FocusPointCustom); focus->setCustomFocusPoint(QPointF(0.25f, 0.75f)); // A point near the bottom left, 25% away from the corner, near that shiny vase
Zooming can be accomplished in a number of ways - usually the more expensive but higher quality approach is an optical zoom, which allows using the full extent of the camera sensor to gather image pixels. In addition it is possible to digitally zoom, which will generally just enlarge part of the sensor frame and throw away other parts. If the camera hardware supports optical zoom this should generally always be used first. The maximumOpticalZoom() method allows this to be checked. The zoomTo() method allows changing both optical and digital zoom at once.
focus->zoomTo(3.0, 4.0); // Super zoom!
Some notes on autofocus
Some hardware supports a movable focus lens assembly, and typically this hardware also supports automatically focusing via some heuristic. You can influence this via the FocusPointMode setting - typically the center of the frame is brought into focus, but some hardware also supports focusing on any faces detected in the frame, or on a specific point (usually provided by a user in a "touch to focus" scenario).
This class (in combination with QCameraFocusZone) can expose information on what parts of the camera sensor image are in focus or are being used for autofocusing via the focusZones() property:
focus->setFocusPointMode(QCameraFocus::FocusPointAuto); const QList<QCameraFocusZone> zones = focus->focusZones(); for (const QCameraFocusZone &zone : zones) { if (zone.status() == QCameraFocusZone::Focused) { // Draw a green box at zone.area() } else if (zone.status() == QCameraFocusZone::Selected) { // This area is selected for autofocusing, but is not in focus // Draw a yellow box at zone.area() } }
See also QCameraFocusZone.
Member Type Documentation
enum QCameraFocus::FocusMode
flags QCameraFocus::FocusModes
Constant | Value | Description |
---|---|---|
QCameraFocus::ManualFocus | 0x1 | Manual or fixed focus mode. |
QCameraFocus::HyperfocalFocus | 0x02 | Focus to hyperfocal distance, with the maximum depth of field achieved. All objects at distances from half of this distance out to infinity will be acceptably sharp. |
QCameraFocus::InfinityFocus | 0x04 | Focus strictly to infinity. |
QCameraFocus::AutoFocus | 0x8 | One-shot auto focus mode. |
QCameraFocus::ContinuousFocus | 0x10 | Continuous auto focus mode. |
QCameraFocus::MacroFocus | 0x20 | One shot auto focus to objects close to camera. |
The FocusModes type is a typedef for QFlags<FocusMode>. It stores an OR combination of FocusMode values.
enum QCameraFocus::FocusPointMode
Constant | Value | Description |
---|---|---|
QCameraFocus::FocusPointAuto | 0 | Automatically select one or multiple focus points. |
QCameraFocus::FocusPointCenter | 1 | Focus to the frame center. |
QCameraFocus::FocusPointFaceDetection | 2 | Focus on faces in the frame. |
QCameraFocus::FocusPointCustom | 3 | Focus to the custom point, defined by QCameraFocus::customFocusPoint property. |
Property Documentation
customFocusPoint : QPointF
This property represents the position of the custom focus point, in relative frame coordinates: QPointF(0,0) points to the left top frame point, QPointF(0.5,0.5) points to the frame center.
The custom focus point property is used only in FocusPointCustom
focus mode.
Access functions:
QPointF | customFocusPoint() const |
void | setCustomFocusPoint(const QPointF &point) |
digitalZoom : const qreal
This property holds the current digital zoom value.
Access functions:
qreal | digitalZoom() const |
Notifier signal:
void | digitalZoomChanged(qreal value) |
See also QCameraFocus::opticalZoom.
focusMode : FocusModes
This property holds the current camera focus mode.
This controls the way the camera lens assembly is configured.
Access functions:
QCameraFocus::FocusModes | focusMode() const |
void | setFocusMode(QCameraFocus::FocusModes mode) |
See also QCameraFocus::isFocusModeSupported().
focusPointMode : FocusPointMode
This property holds the current camera focus point selection mode.
If the camera focus mode is set to use an autofocusing mode, this property controls the way the camera will select areas of the frame to use for autofocusing.
Access functions:
QCameraFocus::FocusPointMode | focusPointMode() const |
void | setFocusPointMode(QCameraFocus::FocusPointMode mode) |
See also QCameraFocus::isFocusPointModeSupported().
focusZones : const QCameraFocusZoneList
Returns the list of active focus zones.
If QCamera::FocusPointAuto or QCamera::FocusPointFaceDetection focus mode is selected this method returns the list of zones the camera is actually focused on.
The coordinates system is the same as for custom focus points: QPointF(0,0) points to the left top frame point, QPointF(0.5,0.5) points to the frame center.
Access functions:
QCameraFocusZoneList | focusZones() const |
Notifier signal:
void | focusZonesChanged() |
opticalZoom : const qreal
This property holds the current optical zoom value.
Access functions:
qreal | opticalZoom() const |
Notifier signal:
void | opticalZoomChanged(qreal value) |
See also QCameraFocus::digitalZoom.
Member Function Documentation
[signal]
void QCameraFocus::digitalZoomChanged(qreal value)
Signal emitted when digital zoom value changes to new value.
Note: Notifier signal for property digitalZoom.
[signal]
void QCameraFocus::focusZonesChanged()
This signal is emitted when the set of zones used in autofocusing is changed.
This can change when a zone is focused or loses focus, or new focus zones have been detected.
Note: Notifier signal for property focusZones.
[signal]
void QCameraFocus::maximumDigitalZoomChanged(qreal zoom)
Signal emitted when the maximum supported digital zoom value changed.
The maximum supported zoom value can depend on other camera settings, like capture mode or resolution.
[signal]
void QCameraFocus::maximumOpticalZoomChanged(qreal zoom)
Signal emitted when the maximum supported optical zoom value changed.
[signal]
void QCameraFocus::opticalZoomChanged(qreal value)
Signal emitted when optical zoom value changes to new value.
Note: Notifier signal for property opticalZoom.
[virtual protected]
QCameraFocus::~QCameraFocus()
Destroys the camera focus object.
bool QCameraFocus::isAvailable() const
Returns true if focus related settings are supported by this camera.
You may need to also check if any specific features are supported.
bool QCameraFocus::isFocusModeSupported(QCameraFocus::FocusModes mode) const
Returns true if the focus mode is supported by camera.
bool QCameraFocus::isFocusPointModeSupported(QCameraFocus::FocusPointMode mode) const
Returns true if focus point mode is supported.
qreal QCameraFocus::maximumDigitalZoom() const
Returns the maximum digital zoom
This will be 1.0
on cameras that do not support digital zoom.
qreal QCameraFocus::maximumOpticalZoom() const
Returns the maximum optical zoom.
This will be 1.0
on cameras that do not support optical zoom.
void QCameraFocus::zoomTo(qreal optical, qreal digital)
Set the camera optical and digital zoom values.
Since there may be a physical component to move, the change in zoom value may not be instantaneous.