QModbusDataUnit Class
QModbusDataUnit is a container class representing single bit and 16 bit word entries in the Modbus register. More...
| Header: | #include <QModbusDataUnit> |
| qmake: | QT += serialbus |
| Since: | Qt 5.8 |
This class was introduced in Qt 5.8.
Public Types
| enum | RegisterType { Invalid, DiscreteInputs, Coils, InputRegisters, HoldingRegisters } |
Public Functions
| QModbusDataUnit(QModbusDataUnit::RegisterType type, int address, const QVector<quint16> &data) | |
| QModbusDataUnit(QModbusDataUnit::RegisterType type, int address, quint16 size) | |
| QModbusDataUnit(QModbusDataUnit::RegisterType type) | |
| QModbusDataUnit() | |
| bool | isValid() const |
| QModbusDataUnit::RegisterType | registerType() const |
| void | setRegisterType(QModbusDataUnit::RegisterType type) |
| void | setStartAddress(int address) |
| void | setValue(int index, quint16 value) |
| void | setValueCount(uint newCount) |
| void | setValues(const QVector<quint16> &values) |
| int | startAddress() const |
| quint16 | value(int index) const |
| uint | valueCount() const |
| QVector<quint16> | values() const |
Related Non-Members
| typedef | QModbusDataUnitMap |
Detailed Description
QModbusDataUnit can be used for read and write operations. The entries are addressed via startAddress() and the valueCount() number of contiguous entries. registerType() determines which register is used for the operations. Note that some registers are read-only registers.
The actual values() are either single bit or 16 bit based. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils only accept single bits. Therefore 0 is interpreted as 0 and anything else 1.
Member Type Documentation
enum QModbusDataUnit::RegisterType
This enum describes all supported register types.
| Constant | Value | Description |
|---|---|---|
QModbusDataUnit::Invalid | 0 | Set by the default constructor, do not use. |
QModbusDataUnit::DiscreteInputs | 1 | This type of data can be provided by an I/O system. |
QModbusDataUnit::Coils | 2 | This type of data can be alterable by an application program. |
QModbusDataUnit::InputRegisters | 3 | This type of data can be provided by an I/O system. |
QModbusDataUnit::HoldingRegisters | 4 | This type of data can be alterable by an application program. |
Member Function Documentation
QModbusDataUnit::QModbusDataUnit(QModbusDataUnit::RegisterType type, int address, const QVector<quint16> &data)
Constructs a unit of data for registertype. Start address of the data is set to address and the unit's values to data. The value count is implied by the data size.
QModbusDataUnit::QModbusDataUnit(QModbusDataUnit::RegisterType type, int address, quint16 size)
Constructs a unit of data for registertype. Start address of the data is set to address and the size of the unit to size. The entries of values() are initialized with 0.
QModbusDataUnit::QModbusDataUnit(QModbusDataUnit::RegisterType type)
Constructs a unit of data for register type. Start address is set to 0, data range and data values are empty.
QModbusDataUnit::QModbusDataUnit()
Constructs an empty, invalid QModbusDataUnit. Start address is set to -1 and the registerType is set to QModbusDataUnit::Invalid.
bool QModbusDataUnit::isValid() const
Returns true if the QModbusDataUnit is valid; otherwise false. A QModbusDataUnit is considered valid if the registerType() is not QModbusDataUnit::Invalid and the startAddress() is greater than or equal to 0.
QModbusDataUnit::RegisterType QModbusDataUnit::registerType() const
Returns the type of the register.
See also setRegisterType() and QModbusDataUnit::RegisterType.
void QModbusDataUnit::setRegisterType(QModbusDataUnit::RegisterType type)
Sets the register type.
See also registerType() and QModbusDataUnit::RegisterType.
void QModbusDataUnit::setStartAddress(int address)
Sets the start address of the data unit.
See also startAddress().
void QModbusDataUnit::setValue(int index, quint16 value)
Sets the register at position index to value.
See also value().
void QModbusDataUnit::setValueCount(uint newCount)
Sets the size of the requested register's data block to newCount.
This may be different from values() size as this function is used to indicated the size of a data request. Only once the data request has been processed valueCount() is equal to the size of values().
See also valueCount().
void QModbusDataUnit::setValues(const QVector<quint16> &values)
Sets the values of the data unit. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils tables only accept single bit value, so 0 is interpreted as 0 and anything else as 1.
See also values().
int QModbusDataUnit::startAddress() const
Returns the start address of data unit in the register.
See also setStartAddress().
quint16 QModbusDataUnit::value(int index) const
Return the value at position index.
See also setValue().
uint QModbusDataUnit::valueCount() const
Returns the size of the requested register's data block or the size of data read from the device.
This function may not always return a count that equals values() size. Since this class is used to request data from the remote data register, the valueCount() can be used to indicate the size of the requested register's data block. Once the request has been processed, the valueCount() is equal to the size of values().
See also setValueCount().
QVector<quint16> QModbusDataUnit::values() const
Returns the data in the data unit. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils tables only accept single bit value, so 0 is interpreted as 0 and anything else as 1.
See also setValues().
Related Non-Members
typedef QModbusDataUnitMap
Synonym for QMap<QModbusDataUnit::RegisterType, QModbusDataUnit>.
This typedef was introduced in Qt 5.8.